Australian as 4687: 2007 Standard Temporary Fence China

         Australian AS 4687:2007 Standard temporary fence China
 

Temporary fence

It is consist of welded mesh panel,round tube frame(square tube frame),plastic feet and top connection. This kind of fence has a superior structure, the globality,mobility and environmental suitability is very good .The fence is easy transport , dismantle easily ,low cost . It has the advantage of one cost, many times used.

Material: hot dip galvanized  tube and wire 
Zinc coating:  200g/m2 on wire,300g/m2 on pipes
Hot Dipped Galvanized : Australian Standard-42 Microns. 


Two type of Temporary fence 

1. Welded tempoary fence    2. chain link temporary fence 
 

Accessories of temporary fence 

1.   

The clamp of Temporary Fence
---High quality Temporary Fence Clamps.
---Hot Dipped Galvanized TO Australian Standard-42 Microns. 
---Specially moulded and 4 mm thick for additional strength.


2.
Cemented plastic fence feet 

---Standard specification:580mm long,245mm wide,130mm high
---Thickness of the block:2.5mm
---Hole diameter:25mm,32mm,42mm & 48mm


Our plastic fence feet offer the following benefits over standard concrete fence feet:
---Made of plastic which is made from polypropylene.
---UV5 for sun/weather protection.
---A piece of high quality steel bar for reinforcement.
---Post holes can run across or go up and down the blocks.
---Designed to be filled with concrete.
   

 

the fencing brace:
 
Temporary fence stays are used to support the temporary fence in high wind situations or on long runs to ensure the fence once erected remains secure.
Fence stays are hot dipped galvanised to Australian Standard - 42 Microns and are attached to the mesh panels by 2 clamps and weighted down by concrete filled plastic feet.


Applications of Hot dip galvanized  Australia  temporary fence 

1. commercial construction sites               2. Domestic housing sites 

 
Temporary fence welded quality control 

1.  Use carbon-dioxide arc welding(CO2gas) 
2.  Anti -climb mesh infill
3.  360° weld between the vertical & horizontal pipe
4.  High zinc coating on pipes 42 microns =300g/m2 



Temporary fence produce process 

Pre hot dip gal. wire drawing--- cut wire and pipes ---wire welded---cut the corners of the mesh---Pre hot dip gal. pipes welded-polish the welds-paint anti-rust epoxy-spray sliver powder coat on each welds-stacking-packaging
 

Specification of Temporary Fence

Recommended Specification of temporary fence 

Different specifications are available according to customers' special inquiry or detailed drawings.

   

Character of temporary fence 

1. It is made by good quality Q195 wire and Q235 pipes with high strength.
2. Treatment is hot dipped galvanized,and 200g/m2 on wires,300g/m2 on pipes.
3.It can last more than 10 years,save your maintenance cost.
4. Easy to relocate & stackable
5.No digging or pavement damage with the plastic concrete feet
6. Quick installations & removal,and it can be taken by one person 
7. Guaranteed long-term use without rusting
8. Allow repeated use, rental, or resale
9. Corrosion resistant, age resistant, sunshine proof, weather proof, easy installation and move
 

Packaging of temporary fence 


1>There is rubber mat at the bottom of the pallet to avoid the pallet destroyed the panels
2>There is 4 metal corners to keep the pallet more strong.
3>There is metal plate under the plastic bandage to reduce the apressure of fence panels.
4>There is wooden plate at the top of fence panel which can protect the fence panels from being crushed by other pallets.


                               Welcom to visit factory !!!



Company info 

Anping County XiangMing Wire Mesh Products Co.,ltd
--We put " habit of targeted country" at first

 

Our Services
 
Pre-sale Service
1. Sample can be offered with sample charge and courier fee by buyer's side.
2. We have full stock, and can deliver within short time. Many styles for you to choose.
3. OEM and ODM order are accepted, any kind of logo printing or design are available.
4. Good Quality + Factory Price + Quick Response + Reliable Service, is what we are trying best to offer you
5. All of our products are produced by our professional workman and we have our high-work-effect foreign trade team, you can totally believe our service.
6. We have rich experience of design, manufacture and sell porducts, we cherish every order from our honor.
After you choose
1. We will count cheapest shipping cost and make invoice to you at once.
2. Check quality again, then send out to you at 1-2 working day after your payment,
3. Email you the tracking no, and help to chase the parcels until it arrive you.
After-sale service
1. We are very glad that customer give us some suggestion for price and products.
2. If any question, please contact with us freely by E-mail or Telephone.



FAQ

1.Why should we choose your company?
More than 20 years producer experiences, familiar with customer requirement, supply high quality product in time. We have a complete set of production line. And our price is definitely competitive, they are  good and inexpensive.

2.Can I get samples?
Of course! Sample charges free, but need pay delivery charges.and the sample will be readly in four days.

3.What is the package?
by pallet or in bulk . Custom design are all available. 

4.Which country is your main market?
There have been more than 30 countries use our product, mainly include Australia,Canada,China,Korea,Germany,Russia,Singarpore,Oman,South Africa etc

5.How to get the specific price? 
Please advise the mesh and wire diameter of welded wir mesh you need, as well as the rolls size. If you have not the detailed specification, please give us your application, then we can recommend the proper welded wire mesh accordingly. Custom design are all available. 





 

12V LED Pool Lights

12V Led Pool Lights,Inground Pool Lights,Low Voltage Pool Led Lights,Led Submersible Pool Lights

Guangzhou Qshine Pool Lights Manufacture Co., Ltd , https://www.qshinepoollight.com