The toilet is one of the common bathroom equipments that are indispensable in the family. However, many toilets look beautiful, but due to many reasons such as the aging of materials and accessories, there are many problems in the use of toilets. Yesterday, the reporter visited some consumers and summed up the four common problems that toilets are prone to generate during use. On these issues, people in the industry advised consumers to pay attention to details when looking at toilets. , ask, check and other four strokes to identify the quality is good or bad.
Ethino tiles    Faenza sanitary hardware
1, the water can not change the bad?
Mr. Wang’s newly renovated home hasn’t lived in the house for a few years. The toilet that cost more than RMB 2,000 was leaking, the water parts were broken, and the keys on the top of the tank were also malfunctioning. It is very inconvenient to flush the toilet with a bowl of water.
Mr. Wang wants to replace a new set of toilet water parts, but only after he has learned that different types and models of toilet water can not be universal, especially the products purchased in the early years are one-on-one special, once the model is not Reproduction, then the toilet parts matching this model will be hard to find.
Details Comments:
The water in the water tank is one of the key components of the toilet, and mainly includes three large blocks such as the inlet valve, the outlet valve, the top pressing or the side pressing. Any one of the accessories may cause problems and may affect the use.
“The most well-known sanitary ware brands on the market currently use water products manufactured by famous brand manufacturers.†Yu Dexian, Marketing Manager of Gold Brand Bathroom Brand, told reporters that the generally better-quality water parts are made of superior engineering plastics such as ABS and PP. Plate production, good toughness and strong corrosion resistance, not easy to aging break, and at least 3 to 5 years warranty.
2, sewage is not easy to return?
The reporter once visited toilets in many public places such as hotels and hospitals and found that the toilets in some toilets are very smooth. Only one time of water can make them clean, while others are not. Even when the water flowed back again, the dirt looked very disgusting.
Details Comments:
The reason why toilets are not conducive to sewage and easy to produce a surge is that they are related to the flushing method of toilets, whether the sewage pipes are fully glazing, glazing methods, and water tanks. According to He Shushan, there are mainly two types of effluent methods for toilets, namely siphon and flush. However, “it is not important what kind of method is used to discharge pollutants. The key point is whether the design of drainage hole and pipeline is reasonable and whether the inner wall of the pipeline is smooth.†"To identify whether the water pipe is fully glazing, the simple method is to touch it by hand. In addition, the integrated one-piece type water tank can also be used to make the inner wall of the water tank of the same size or separate fired type smoother, flushing sewage. The ability is also stronger." Yan Chao, head of the marketing department of Rifeng Enterprise Co., Ltd. stressed.
3 stench that can't be driven?
Miss Li moved to her new home in 2005 and lived there for less than 2 years. She found that the bathroom in her home often gave off an odor. She couldn’t rinse off her toilets. Later, Miss Li invited a person from the professional decoration company to come. Looking at it, it was found that the odor came from the toilet itself.
According to Miss Li, when he bought the toilet, he only took a fancy to the toilet, which was cheaper than the other toilet of the same brand. He bought it without hesitation. However, it was discovered after a period of use that the toilet was difficult to clean and prone to dirt.
Details Comments:
The reason why toilets are prone to scale formation and odor emission is that the industry believes that the design of the water seal is not up to standard and the water absorbency of the porcelain base is too high.
Yan Chao, head of the marketing department of Rifeng Enterprise Co., Ltd., told reporters that under the water outlet of the toilet, there is usually a “water sealâ€, which is mostly S-shaped. According to relevant national standards, the “water seal†water level must be at least 5 cm to seal off the odors of the sewage pipelines. However, due to the lack of technology or cutting corners in some small brands, the “water seal†S-shaped elbow design is unreasonable. It may cause the odor of the sewage pipeline to rise. In addition, the lower the water absorption rate of the porcelain base of the toilet seat is, the better. Some high-end brand toilet seat bases are mostly made of high temperature porcelain, also called full porcelain.
Yan Chao suggested that consumers not only carefully look at the texture, gloss, and compactness of the base and cover when they buy the toilet, but also need to use their hands to perceive their appearance and whether the inner wall is smooth and delicate, and whether there are pinholes, etc. To guide the purchaser to learn more about the product's water absorption, etc., generally do not choose low temperature porcelain with high water absorption.
4 water saving toilet is not water-saving?
Mr. Ye said that the family bought a toilet at home. At that time, the shopping guide said that the maximum amount of flushing was only 4 liters, which is more energy-saving than many brands on the market. Later, Mr. Ye found that the amount of water flushed by the toilet was not too large, but at least two flushes were required to flush away the dirt. The actual water consumption was 6 litres higher than that of flush toilets. Bigger.
Details Comments:
Playing digital games in terms of water saving is a common practice in many toilet manufacturers.
Here to remind consumers that in the purchase of the toilet, it is best to be on-site trial, generally in the toilet sales showroom has a special configuration for the toilet flush test water polo, this test water is very light, can float On the water. The more flushed test balls are used, the more flushing capacity of the toilet is. According to the relevant national standards, 80 test balls are washed away at once; however, on the current market, some high-end toilets can wash away 200 water polo balls at most.
Bathroom Home Furnishing Brands Toilet Decoration Design Home Decor House Decorating House Decorating Decorating Company Okay Bathroom Design Public Bathroom Bathroom Tiles Bathroom Leaking High Grade Tile ld Tile
Time Relay,Definite Time Relay,Time Based Relay,Time Relay Allen Bradley
Yuyao Gongyi Meter Co.,Ltd. , https://www.yycj.com