Big brands of solid wood doors (decoration effect map) in the dehydration process to do a better job, the relative moisture content of about 8%, so that after molding the door is not easy to deformation, cracking, long life. After comparing the reporters found that the market price of solid wood doors ranging from 3,000 yuan to nearly ten thousand yuan, suitable for high-end consumer groups. Wang Xian, general manager of Boyi Wooden Door, said that the wood performance of the solid wood composite door is more stable, and the price of the solid wood composite door is generally between 1,000 yuan and 3,000 yuan per door, and thus becomes the majority of consumption. The best choice for decoration.
In the face of a wide variety of wooden doors on the market, consumers often can't figure out where they are. Wooden door products can be divided into solid wood doors, solid wood composite doors, bamboo-wood composite doors, steel wood doors, etc., depending on the materials, due to the different skin, paint, hardware and other processes, the price difference of a few hundred or even a few thousand dollars. After investigation, the reporter learned that solid wood composite doors and solid wood doors are the best-selling types on the market.
Select 诀çª
1, select function
In addition to considering the security factors of anti-theft, the entrance door can choose a beautiful, solid and heavy wood door; the bedroom (decoration effect map) door mainly considers privacy and creates a warm atmosphere, so it is more light and solid. The door type; study (decoration renderings) door should choose good sound insulation, good light transmission, strong sense of the design of the door, such as with an ancient window (decoration renderings) edge of the wooden door pattern, can produce simple and elegant Scholarly charm; kitchen (decoration renderings) door should be selected waterproof, good sealing of the door, so as to effectively block cooking fumes; bathroom door mainly pay attention to privacy and water resistance and other factors.
2, observe the quality
It is impossible for consumers to go to manufacturers to stare at the production process of wooden doors, but they can assess the quality of products through simple visual inspections. Hand rub the door of the door frame, panel, corner, requires no scratch, soft and delicate; and then stand on the side of the door to see if the door paint surface convex wave. By these two methods, consumers can basically buy wooden doors that look good.
3, concerned about the appearance of environmentally friendly
It is also very important whether the environment is environmentally friendly. When purchasing, consumers can open the closed package first, and the probes go in for smelling pungent odors. If people shed tears and sneeze, the amount of formaldehyde released is relatively high. Most of the wooden doors with harmful emissions are mostly made of cheap man-made boards, so the price of the whole door is often very low. Due to the use of low-quality glue in a large number of cheap man-made panels, the amount of release of various harmful substances has been severely exceeded, so we must be alert to low-cost traps.
4, check the report, staring at the hole
Consumers should try their best to select good manufacturers with good brand reputation. By checking the relevant qualification certifications of manufacturers, and checking whether the relevant industry standards are complete and whether the release of various harmful substances is within the allowable range of standards, the quality of their products should be measured. Before the wooden door is sent to the home for installation, pay attention to the final check by checking the internal material of the door lock hole. In addition to paying attention to the environmental protection of wooden doors, be sure to check the relevant qualifications of the manufacturers to measure the pros and cons of their products.
Maintenance Weapon
1. Lightly open the light off Do not hung heavy items on the door leaf to avoid sharp objects touching or scratching. When opening or closing the door leaf, do not use excessive force and do not hit the wooden door. Do not open the door locks with wet hands or spill corrosive solvents on the wooden doors and door locks. Do not use excessive force when opening the door lock or turning the door lock handle.
2. When different glass doors are used for different materials to clean the glass, do not allow the cleaning agent or water to penetrate into the gap of the glass bead to prevent deformation of the bead. Do not use too much force when wiping the glass to avoid glass damage. After the glass breaks, there is a big bump and be sure to ask a professional to repair it. Do not rub the corners of the wooden door frequently so as to avoid discoloration and damage of the finish material.
3, hardware, symptomatic maintenance hinges, door locks and other regular activities of hardware accessories, when the loosening should be immediately tightened. When the door lock does not work properly, it can be lubricated by adding a proper amount of pencil core foam to the keyhole.
4, soft cloth wipe stains remove the stains on the surface of the wooden door (such as fingerprints), you can use Kazakhstan gas after the wet, wipe with a soft cloth, hard cloth is easy to scratch the surface. Vacuum cleaners can also be used to clean and dust regularly. When the stain is too heavy, use a neutral detergent, toothpaste, or special cleaning agent for the furniture. After cleaning, wipe immediately.
5, to ensure the temperature and humidity environment Spring and winter should maintain good indoor ventilation, so that the doors in a normal temperature and humidity environment, to prevent the wooden doors due to humidity, temperature and deformation is too large, metal parts corrosion rust, edge sealing, decorative materials fall off phenomenon . When using electric heating or other heating equipment during the winter season, keep away from the wooden door so as not to deform it by heat.
6. When painting the walls of a wooden door while brushing a wall, cover the wooden doors to prevent paint coating from peeling and discoloring the wood door finish material, which will affect the overall appearance.
Tips
Selection of high-quality hardware In addition to the production process of the wooden door itself, the quality of the hardware also affects the service life of the wooden door. The hinge is a type of hardware that connects the wooden door and the door frame. The good hinge has anti-corrosion performance and good transmission. It can ensure that the hinge is evenly distributed and does not cause damage due to the door's own weight. Wooden door price three-step calculation
The price of most middle-to-high grade wooden doors in home stores includes three parts: door leaf price, door frame price, and wood price. The door leaf is the main body of the door and is priced in square meters. The door frame contains two front and back sides and is calculated in terms of perimeter. The wood line is a part of the door frame that surrounds the wall and is priced in meters. In addition, the prices of most solid wood doors and solid wood composite doors do not include hardware locks, and they need to be purchased separately.
Building Materials Knowledge Door Buying Confucius Decoration Wooden Door Glass Door Effect Picture Window Effect Picture Window Door Decoration Effect Picture Indoor Decoration Effect Picture Wedding Room Decoration Effect Picture Home Decoration Effect Picture Bedroom Soundproof Steel Wood Interior Door Glass Furniture Glass Door Technology Glass Kitchen Glass Sliding Door Study Furniture Bathroom Door Decoration Renderings Bathroom Door Study Picture Gallery Bedroom Toilet Waterproof Price Overall Toilet Toilet Design Toilet Waterproof Bathroom Decoration Effect Picture Bedroom Decoration Home
ALUMINUM METAPHOSPHATE
PRODUCT NAME: Aluminum Phosphate, Aluminum Metaphosphate , Potassium Silicate Curing Agent, Aluminum Orthphosphate ,Aluminium Acid Phosphate,Polymer Aluminum Phosphate
PRODUCT TYPE:High Temperature Materials, Binder
PRODUCT APPEARANCE:White Powder
CHECICAL CLASS:Al(PO3)3
CAS No．:13776-88-0.
PRODUCT APPLICATION:It is mostly used as binder and curing agent in the production of Hi-Temp Refractory Materials for kiln. It also serves as fluxing agent in the production of special glass, as binder in fabrication of ceramics or tooth, and so on.
Mainly used in producing special optical glass;Also can be used in manufacturing enamel, glaze, as well as the development of new materials, etc.
TECHNICAL DATA
|
Test Items |
Technical Parameters |
|
Appearance |
White Powder |
|
The PH Value |
2-4 |
|
Residue on sieve(45um)% |
≤0.5% |
|
P2O5 % |
65-75 |
|
Al2O3 % |
18-22 |
STANDARD PACKAGING 25kg/bag, Plastic-lined and plastic-coated woven bags or Composite paper bags.
TRANSPORT AND STORAGE
Protect against weathering and exposed under the blazing sun. Store in a cool, dry place and avoid extreme fluctuations in temperature.
Special conditions for opened packaging: Close bags after use to prevent the absorption of moisture and contamination.
Aluminum Metaphosphate
Aluminum Metaphosphate,High Temperature Materials,Aluminum Orthphosphate,Aluminium Acid Phosphate,Polymer Aluminum Phosphate
shijiazhuang city xinsheng chemical co.,ltd , http://www.xsphos.com