This kind of lamp is often seen in our lives. It not only brings light to us, but it can also change the atmosphere of the home. But how should the fluorescent tube be disassembled? If you want to replace it with a new one, what should you do? Here's a small series to tell you about the method.
How to disassemble the fluorescent tube
First of all, be sure to remember to turn off the switching power supply before you want to disassemble. Do not operate under power-on conditions. Otherwise, it will affect people's safety.
Second, if your lamp is still old-fashioned, there will be gaps on both sides of it. Just rotate the inner two needles, then pull one end out of the gap and pull the other end out.
Moreover, if your home is an aluminum alloy LED tube, then you need to use a screwdriver to remove it, because there are two Phillips screws on both ends of this tube, but just turn it to open, then the lamp is very It's easy to remove it.
In the end, it is also necessary to remove the starter, which is somewhat the same as removing the lamp. Turn it and take it out of the fixture. But be sure to pay attention to safety when operating. It's best to have family members next to you, just in case.
2. How to replace a new lamp
a. If the life of the lamp at home is really at the end, it must be replaced with a new fluorescent lamp. The specific method of operation is to disconnect the total power supply first, and then insert the purchased lamp into the corresponding position. Generally, the lamp can be installed and the lamp can be fixed better. However, if the lamp is installed, if there is a flickering phenomenon, it means that the installation is not enough, and it needs to be adjusted. It must wait until the light is no longer blinking.
b. When replacing a new lamp, be sure to remember to install the starter. Because the starter plays a vital role in the lamp, simply insert the starter into its position and tighten it to fix it. After installation, you can try to turn on the power switch to determine the normal use of the lamp.
c. If only one part of the lamp is broken, it must first find out where the reason lies and then deal with it again. But if you don't have enough assurance about these operations, then it is still advisable to find professional people to help you, so that you will be much safer and more, but it will take some expenses.
Xiao Bian concludes: The above is the introduction of how to disassemble fluorescent tubes and how to replace them with new ones. I hope Xiao Bian can help the friends in need in this area. In addition to grasping the above content, it is recommended that when choosing a product, it is best to consider brand products with higher reputation. This will not only ensure the service life of fluorescent lamps, but also avoid the trouble caused by frequent replacement in the future.
Fluorescent tube
Kitchen utensil,High Quality Kitchen utensil,Kitchen utensil Details, CN
Yangjiang YJCB Trade Co., Ltd , https://www.cbprokitchen.com