Lshf Compound for Butterfly Cable

Introduction
EPchem® FTTX-012S is polyolefin based material containing inorganic flame retardant, antioxidant, lubricant, etc., produced by mixing, plasticizing and then pelletizing. FTTX-012S is excellent in mechanical properties, flame retardant performance, good liquidity and processability, especially suitable for high-speed extrusion.

Characteristics *The data in the list above is typical value rather than the guarantee value.
Processing
FTTX-012S has high liquidity and good processing performance, can be well processed using PVC and Polyethylene standard extrusion screw, preferring a low compression ratio (1.2 ~ 1.8) screw for the best extrusion effect. In general we recommend the following processing conditions:

• Extruder L/D: 20~25
• Filter (mesh): 30~60
• Temperature setting:

     Zone1    Zone2    Zone3   Zone4    Zone5      Die
    110ºC   120ºC   135ºC  145ºC   150ºC   150~165ºC
The above temperatures are for reference only, but should be adjusted depending on specific equipment.
FTTX-012S includes black and natural color. Users are free to add color masterbatches to natural color material. The suggested weight ratio is 1.5% or so.
            
Storage
These compounds must be stored under the following conditions:

1. closed and undamaged bags
2. ambient temperature does not exceed 45ºC
3. avoid direct exposure to sunlight and weathering
4. shelf life:12 months.

Package
To be packed in aluminum foil bag inside and kraft paper bags outside, 25kg net each; or damp-proof cabinets on pallet, 1000kg net each.





The workshop:


Package :


  Introduction
EPchem® FTTX-012S is polyolefin based material containing inorganic flame retardant, antioxidant, lubricant, etc., produced by mixing, plasticizing and then pelletizing. FTTX-012S is excellent in mechanical properties, flame retardant performance, good liquidity and processability, especially suitable for high-speed extrusion.

Characteristics *The data in the list above is typical value rather than the guarantee value.
Processing
FTTX-012S has high liquidity and good processing performance, can be well processed using PVC and Polyethylene standard extrusion screw, preferring a low compression ratio (1.2 ~ 1.8) screw for the best extrusion effect. In general we recommend the following processing conditions:

• Extruder L/D: 20~25
• Filter (mesh): 30~60
• Temperature setting:

     Zone1    Zone2    Zone3   Zone4    Zone5      Die
    110ºC   120ºC   135ºC  145ºC   150ºC   150~165ºC
The above temperatures are for reference only, but should be adjusted depending on specific equipment.
FTTX-012S includes black and natural color. Users are free to add color masterbatches to natural color material. The suggested weight ratio is 1.5% or so.
            
Storage
These compounds must be stored under the following conditions:

1. closed and undamaged bags
2. ambient temperature does not exceed 45ºC
3. avoid direct exposure to sunlight and weathering
4. shelf life:12 months.

Package
To be packed in aluminum foil bag inside and kraft paper bags outside, 25kg net each; or damp-proof cabinets on pallet, 1000kg net each.





The workshop:


Package :


 

Indoor Lighting

Indoor Lighting,Interior Wall Lights,Led Wall Lights Indoor,Indoor Wall Sconces

NINGBO LONGFLIGHT INTELLIGENT TECHNOLOGY CO.,LTD , https://www.long-flight.com