There are many types of pipe benders, and one of them is a tool commonly used by electricians to lay out pipes and lay pipes for bending or arranging wire pipes. A tool in the shape of a spiral spring. The other is one of the tools that will be used in the air conditioning installation and piping, which is used to bend the copper tube of the air conditioner. The manual pipe bender is suitable for the use of aluminum-plastic pipes, copper pipes and other pipes, which makes the pipe bending neat, smooth and fast. It will not cause deformation and fission of its pipeline. Here's how to use the artificial tube bender.
Â
  How to use artificial pipe bender
Â
Put the red copper pipe that has been retreated (required for some copper pipes) between the fixed wheel with the guide groove and the fixed rod, then use the guide groove of the movable rod to guide the copper pipe, fasten the copper pipe with the fixed rod, and hold it in hand The movable lever handle rotates smoothly clockwise. In this way, the copper tube is bent into a specific shape in the guide groove. Use even force during operation to avoid dead bends or cracks. In daily maintenance, sometimes it is necessary to bend the copper tube with bare hands. At this time, a manual pipe bender is used, and its shape is a spring. During use, the spring is sleeved on the copper pipe to be bent. Try to bend it with a larger radius. The force should be slow and steady. The spring can keep the copper tube from being bent within a certain range.
Â
Method for cold bending pressure guiding pipe with pipe bender
Â
When bending a steel pipe with a manual pipe bender, first mark the place where the steel pipe needs to be bent, and then put the pipe bender on the bent steel pipe. The pipe bender should be placed on both sides of the bent steel pipe. When bending the pipe, two people need to work together. One of them uses the No. 2 pipe bender to fix the bent pipe, and the other uses the No. 1 pipe bender to bend the pipe. The direction of the two people's force is opposite. . The bending quality depends on the person who operates the No. 1 pipe bender. If the right-angle bend is to be bent, the No. 2 pipe bender is fixed, and the No. 1 pipe bender is forced to bend in one direction and gradually to the No. 2 pipe bender. The device moves until it is bent at a right angle, which also ensures the size of the pipeline. The steel pipe should be bent once, and after the pipe is bent, it should be inspected for cracks and depressions. The bending radius of the instrument tube is specified, that is, the bending radius of the high-pressure steel pipe should be greater than 5 times the outer diameter of the pipe, the bending radius of other metal pipes should be greater than 3.5 times the outer diameter of the pipe, and the bending radius of the plastic pipe should be greater than 4.5 of the outer diameter of the pipe Times.
The above is the content about the use method of artificial pipe bender and the method of cold bending the pressure guiding pipe with the pipe bender. I believe that everyone has a certain understanding of the use of artificial pipe benders through the above reading. If you need to use the pipe bender during the decoration work, you can use the above content as a reference.
Manual Chain Hoist,Chain Block,Manual Chain Block,Hand Hoist
Guangdong Gongyou Lift Slings Machinery CO.,LTD , https://www.workmatehoist.com