In 2004, Zhou Huaimin set up a department for the European client project to cooperate with each other and began to inject some European management concepts into the operation of the factory in daily work. The difficulties at the beginning were self-evident, and patiently, after two years of persistence, he finally put the factory on the right track. At this time, Zhou Huaimin found that some of the existing equipment of the factory could not complete the processing requirements put forward by the customers very well, especially because each part size of these high-end products must be inspected and reported to the customer. “The concept of plastic molding is still stuck in injection molding and extrusion. Our plastic parts are completely machined. Therefore, we require the processing speed and precision of the equipment to be very high.†Zhou Huaimin also selected equipment at that time. The memory is still fresh. At that time, he also saw a lot of processing equipment, and urgently needed to find a machine that can meet the processing requirements of existing workpieces. In 2005, it was also coincident with Haas in Suzhou (HFO). All the coincidences seemed to be doomed. Haas became the third "elegant" of Zhou Huaimin and Gebo, and achieved a series of successes.
Haas equipment helps business success
Referring to Haas, Zhou Huamin can't help but share with us the Haas in his eyes. "The choice of Haas equipment is not only because their same European management system matches many of our overseas customers, but also because of our customers' products. The requirement is higher precision and the delivery speed is faster. For this reason, we have chosen Haas VF-2SS and VF-3SS. These two models are double high speed, that is, the moving speed and processing speed are very fast, and the aluminum parts are made. It is more suitable for non-metal. You can see that our non-metal workpieces are machined. It is easy to dissipate heat when machining non-metal. It is easy to control the surface quality and deformation during processing, thanks to Haas. The high speed of the equipment. Of course, we have used a lot of domestic equipment before, and the difference with Haas machine tool is very big, the domestic equipment manufacturer will not guide you how to choose the most suitable tool holder, the cutting fluid is more reasonable. This is like buying a car, but not feeling 4S shop, it is very inconvenient. Haas then has the machine's counterpart service - Suzhou Haas HFO. They The after-sales reaction is very fast, and often it can be eliminated in a few hours without affecting production. In addition, Haas gave me the idea of ​​choosing to “replace†the equipment instead of “repairing†after the equipment has problems, although the cost It will be high, but the reliability will also be improved, and the matching degree will be increased accordingly. This is also the value that was chosen when Haas was chosen at the time."
“We are not doing mass production, we are doing very small quantities, but the products are very high-end, and each part size must be tested and reported to the customer. For this reason, Haas’s machine is now open 24 hours, even In this way, many of our productions have not kept up. I added two Haas machines in June this year, which is estimated to be available in October. At the same time, our requirements for Haas equipment are also with each other. Run-in and the continuous expansion of our business, such as the addition of grating scales and some special requirements, Haas can be very satisfied." Zhou Huaimin expressed gratitude for the status quo of Gebo, he also affirmed Kazakhstan The promotion of the equipment on the growth path of Gebo.
At present, Gebo has been at the forefront in terms of domestic scale and grade. The company has three departments at the same time doing fixtures, and one department in each category will specifically follow up. When talking about the financial crisis of the previous two years, Zhou Huaimin said that there is no impact. "We were just doing high-end this one, not large-scale production. After the financial crisis, in the first half of 2010, orders suddenly poured in a lot. ". Talking about the future trend of high-end fixtures, Zhou Huaimin said that it was designed according to foreign research and development requirements. However, in the recent stage, many foreign companies directly told us about the R&D needs, and we designed them, and then sent the samples to foreign countries for verification. After verification, they were mass-produced in China. According to this development trend, in the next few years, large-scale foreign production plants will gradually disappear, and more overseas customers will choose to come to China for a series of business cooperation, which will be a good opportunity. Gebo will also continue to cooperate with European and American companies, and products may be sent to Asia or other regions.
Phone: +86-512-6596 8780
Fax: +86-512-6596 8770
Email: (End)
| Previous page | 1 | 2 | Next page |
Furniture handles have a strong aesthetic effect on the appearance of furniture. This is because the choice of furniture handle has an important relationship with the shape, color and position of the furniture. Therefore, it is very important to choose furniture handles. The door handles with good quality and good style are not only convenient to use, but also add the finishing touch to the overall beauty of the cabinet. We have strict quality control from material processing, polishing, assembly and packaging. Extensive experiences, mature technology and professional service allows us to meet the different needs of customers of different regions. Special requirements and sizes are available. Please just feel free to contact us if you have any question. Our team is on call for 24/7 to provide the worry-free before/after-sale service.
Handles For Furniture,Kitchen Cupboard Door Handles,Kitchen Cabinet Pulls,Black Cabinet Pulls
Leader Hardware Manufacturer Limited , https://www.leaderhardwarecn.com