KCB-960 type stainless steel gear pump characteristics: KCB-960 type stainless steel gear pump is mainly used in various machinery and equipment conveyed in the lubricating oil lubrication system for conveying a viscosity of 5 × 10-6 ~ 1.5 × 10- 3m2 / s (5-1500cSt), the temperature below 300 ℃ lubricated oil. KCB-960 all-stainless steel gear pump can deliver non-lubricating oil, beverage, low corrosive liquid. Equipped with copper gear can deliver low-point liquid, such as gasoline, benzene and so on. In addition to this series of stainless steel pump configuration common motor, but also according to user needs with the specifications of the explosion-proof motor configuration. Material: 304.316.316L stainless steel. From the spindle extension to the pump to see, clockwise rotation. Flow: 1.1m3 / h-600m3 / h Pressure: 0.28MPa - 2.5MPa Mainly used in oil, oil depots, ports, terminals, ships and other large flow oil, unloading! KCB-960 full stainless steel gear pump gear, shaft, pump body, safety valve, shaft seal composed of the end. The gears are heat-treated to a higher hardness and strength and mounted with the shaft in a replaceable hub. The lubrication of all parts in the pump is automatically achieved using the output medium while the pump is in operation. The pump has a well-designed drain and return tank, the gear torque in the work to bear the smallest, so the bearing load, wear a small, high pump efficiency. KCB-960 type stainless steel as a gear pump is provided with overload protection valve, a pressure relief valve total reflux pump pressure of 1.5 times the rated negative, may allow the discharge pressure range further adjusted according to actual needs. But note that the safety valve can not be used for long-term work of the valve, if necessary, can be installed separately in the pipeline.
Acoustic Panel,Felt Acoustic Panels,Acoustic Wall Panels,Polyester Acoustic Panel
Hebei RooAoo New Material Technology Co.,Ltd. , https://www.raacoustic.com