Yesterday at 8:30 in the morning, Lee Grandma, who lives in Qiao Hongyuan, Qinhuai District, took out a micro-computer similar to the iPad, plugged in a power outlet, and connected the blood glucose meter. Ten minutes later, the old man received a call from Yuan Qun, director of the Department of Endocrinology at Nanjing Tongren Hospital: The elderly, whose blood sugar was 11.7, was very high. I suggest you come to the hospital and adjust the medication.
How can a doctor who is more than ten kilometers away know how to measure blood sugar at home? Director Yuan Quan told reporters the mysteries. Originally, this appearance was like an amplified version of a home cordless phone called a telehealth system consisting of a docking station and a telephone, except that the cordless "phone" was replaced with an iPad-like LCD screen, and the base Is the signal transceiver. As long as the elderly measure, the data will be automatically transmitted online to the computer at the doctor's desk. According to the past medical history of the elderly, the doctor will provide feedback immediately after comprehensive analysis and judgment. With this "senior doctor," it does not matter if there is no cable at home. It does not matter if there is a computer or not. As long as there is electricity, it will do. Simply plug the plug into the outlet and plug the cable into the blood glucose meter or blood pressure meter. Everything is OK. Yuan Qun introduced that the reason for using the Internet of Things technology is mainly to take into account that most people with chronic diseases now are elderly people. Older people are old and many will not be able to access the Internet. Since there is no need to access the network cable and rely on the most popular Internet of Things technology, it is naturally not necessary to pay fees. The only cost is electricity.
an electric winch 4x4 is a tool commonly used
in vehicle recovery. It`s typically bolted to the front of a vehicle (usually a
4WD or truck) and is used when the vehicle gets stranded and needs help getting
pulled out from wherever it`s ended up stuck.
13000LBS Line Speed And Amp Draw (First Layer)
13000LBS Line Speed And Amp Draw(First Layer) |
|||||||
Line Pull |
lb |
No |
4000 |
6000 |
8000 |
10000 |
13000 |
kg |
LOAD |
1818 |
2727 |
3636 |
4545 |
5909 |
|
Line Speed |
ft/min |
33.50 |
9.18 |
8.20 |
6.89 |
6.23 |
5.25 |
m/min |
13.20 |
2.80 |
2.50 |
2.10 |
1.9 |
1.6 |
|
Motor Current |
Amps |
75 |
180 |
230 |
280 |
340 |
400 |
13000LBS Line Speed And Amp Draw(First Layer) |
|||||||
Layer of Cable |
|
1 |
2 |
3 |
4 |
||
Rated Line Pull per Layer |
lb |
13000 |
10000 |
9000 |
7200 |
||
kg |
5909 |
4545 |
4091 |
3273 |
|||
Length of Cable on Drum |
ft |
19.45 |
41.75 |
64.19 |
75.44 |
||
m |
5.93 |
12.73 |
19.57 |
23 |
Typical Applications: off-road vehicles, agricultural vehicles, ATV all-terrain vehicles, yachts, fire rescue vehicles, road barrier vehicles and other special vehicles, special vehicles.
Usages:
Plug the winch remote control into the winch. Your
winch should have come with a remote control attached to a long cord. Look for
the plug at the end of the cord and attach it to the corresponding receptacle
on the outside of the winch. Run the remote control cord from the winch to the
driver`s seat and place the remote control in your vehicle
Put on a pair of thick gloves. Never handle a winch cable without gloves on. The cable could cut your hands.
Find something in front of your car to anchor your winch to. A large tree trunk, boulder, or other vehicle is ideal.
Don`t anchor your winch to something small and weak or you risk breaking it.
Try to find an anchor that`s straight in front of your vehicle.
Use the disengage lever to release the winch cable. The disengage lever should be located on the outside of
the winch. The lever should have an option that says [free spool" or
[disengaged." Turn the lever to that option. This will release the cable so
you`re able to manually pull it out from the winch.
Pull the winch cable all the way to the anchor. Don't pull too
much of the cable out or you'll create unnecessary slack. Set the end of the
cable down next to the anchor.
If the winch cable doesn't reach the anchor, look for another anchor that's closer to your vehicle.
Wrap a tree trunk protector around the bottom of the anchor. A tree trunk protector is a thick nylon strap with two loops, one on each end. Wrap the protector around the anchor so the two end loops are facing you. Hold the two end loops in your hand.
If your winch didn`t come with a tree trunk protector, you can order one online or find one at your local hardware store.
Hook a D-shackle through the 2 loops on the protector. A D-shackle is a curved shackle with a large pin that screws in and out of the shackle. Remove the pin from the D-shackle and put the curved part of the D-shackle through both of the loops on the tree trunk protector. Once the loops are on the shackle, reinsert the pin and twist it to tighten it into place.
Hook the winch hook to the D-shackle with the tip facing up. The winch hook is the hook at the end of the winch cable
Turn the disengage lever back to [engaged." You want the lever to be back in the position it started in before you released the winch cable. This will prevent more cable from coming out of the winch.
Use the winch remote to slowly pull the winch cable taut. Press the button on the remote control to start pulling the winch cable back into the winch. This will cause the winch cable to tighten. Stop pressing the button when the cable is taut
Our Services
1. OEM service is available.
2. Fast producing time.
3. Inspect products one by one before shipping
4. Cheapest price for electric and hydraulic winches
5. Reply promptly in 24 hours.
If you have any questions, please contact with us directly. Compass winches are produced by With High Quality and Good Appearance. Welcome you can visit our Factory. For inquiry, please directly send mail to us.
24v electric winch, 13000lb electric winch, quiet electric winch
Suzhou DAO Material Technologies Co.,Ltd , https://www.dao-compass.com