>>>Links: Several issues to be noted when signing a renovation contract
First, verify the name and qualification of the decoration company
1. To see whether it has home improvement construction qualifications, whether it is a member of the Home Improvement Association
2. Check whether the company name and the name on the contract are the same
3, to knock on the special seal of the decoration company headquarters, not chapter chapter
Second, carefully fill in each space on the contract
1. Be sure to specify the person in charge of the site of Party B (requirements are the management personnel of the decoration company rather than the contractor)
2. Relative to Party B, Party A is in a weak position. Therefore, Party B’s compensation for breach of contract must be higher, Party A’s needs to be lower.
3, the more content of other agreements, the better, such as
A. No smoke and no open fire at the construction site
B. Garbage must be cleared to the designated location of the property
C. The materials purchased by Party A shall be carried by Party B without compensation.
D. Party B shall not suspend work for any reason except Party A cannot make timely payment.
E. All change items are settled at the time of final settlement
F. The utility bill is paid by Party B
G. All changes shall be in writing, signed by both parties, and verbal notices shall be invalid.
H. Party B shall not change the construction personnel, etc., without the consent of Party A.
Third, the contract payment
1, as far as possible the use of self-determined way, because the use of standard forms of the contract, the initiative to be mastered by the decoration company, according to the general home improvement project, decoration company less than 7 days can get 65% of the project, this time may Woodworkers have not yet entered the venue and the actual costs incurred are less than 5,000 yuan.
2, try to fight for 5% of the warranty paid after one year, so that the warranty is basically guaranteed.
IV. Annex to the contract
1, this is a very important content, we must let the decoration company seriously fill in, do not be afraid of trouble
2. The main material quotation is the most important part. The material name, unit price, quantity, brand and grade must be filled in in detail. Once there is an economic dispute, this is evidence. 5. Some additional clauses
1. Regarding the settlement according to the actual amount, it is calculated according to the actual quantity of the project rather than the actual usage of the material.
2, electricians should have electrician admission card
3. Party A’s losses are caused by Party B’s failure to timely handle various documents.
4. After the completion of the project, Party B must provide the water and electricity as-built drawings. Party A will sign and accept the settlement after completion of the project.
5. Party B will bear the costs of rework because of the use of materials that do not conform to the contract. Party B will bear the costs, and Party A will retain the right to deal with the issues in accordance with the "Consumer Protection Law."
6. Party B must provide the project schedule and Party A's procurement material schedule before starting construction and strictly implement it.
Decoration contract entrance decoration restaurant decoration home decoration decoration decoration decoration decoration company okay
Fully Automatic Traveling Rotary Head Die Cutting Press Machine is used for the cutting of all kinds of small knife molds for leather, football panels, shoes (sole, insole, shoe-pad, upper of the shoe), cloth, masks, toys, etc.
1.The lifting position of pressing board can be freely set to reduce idle travel and enhance work efficiency.
2.The movement of cutting head is controlled by automatic speed variation to realize flexible movement with high speed and accurate positioning and without impact.
3.Differential oil way is adopted to allow rapid and convenient cutting.
4.Special specifications of the product can be customized.
Technical Info
Working pressure: 40T (other type can be customized)
Effective working width: 1650mm/ 1800mm
Punch head moving stroke: 5~150mm (up & down)
Suitable disc size: less than 400mm diameter
Punch cutting speed: 3S/punch
Can load 6 jumbo rolls with air expand shafts & automatic brake system, or simple shaft also available.
Hydraulic press, automatic movement of punch head
Equipped with automatic raw material continuous feeding system.
PLC control system, parameters like feeding length, moving height, transverse distance can be set on machine easily.
We distributes and wholesales various brands of Bonded Abrasives, Abrasive Sanding Disc, Abrasive Flap Disc , Flap Wheels , Flap Disc Backing Pad, Flap Disc Adhesive , and Surface Conditioning Product etc, and enjoy a high position among consumers.
Sanding Disc Machine,Sandpaper Punching Machine,Abrasive Disc Cutting Machine,Automatic Sandpaper Machine
Zhengzhou Jiading Abrasive Manufacturing Co.,Ltd , https://www.jiadingabrasive.com