RY heat transfer oil pump is a single-stage cantilever structure divided into the foot support and center support, the pump inlet is axial suction, the outlet is centered vertically upward. The pump and drive motor are mounted on the same base with flexible couplings. The entire unit without adding cold system. RY heat transfer oil pump structure is reasonable, excellent performance, reliable use. Suitable for conveying high temperature liquids without solid particles. The degree of corrosion resistance and temperature depend on the material of the main parts in contact with the medium (divided into three categories: 1.HT200; In addition, RY series of heat pump is also in the mechanical industry, food industry, pharmaceutical production, hot oil furnace oil circulation system , Hot oil heating circulation system is widely used. RY thermal oil pump performance range (according to the design point) 1, flow 1-500m3 / h; 2, lift 10-125m; 3, temperature -20oC; -350oC. Advantages and Features RY heat transfer oil pump has advanced technology, high efficiency, long-term stable operation in the hot state no leakage, no additional cooling system, the use of safe and reliable, and other features in our heating medium heating system has been widely used, has entered RY series of air-cooled high-temperature heat transfer oil pump is mainly used for conveying weakly corrosive high-temperature liquid without solid particles, the use temperature ≤ 370 ℃ , Is an ideal circulation pump. The heat transfer oil pump paper box widely used in high-temperature stereotypes, dynamic vulcanized tire and reclaimed rubber machinery, flat vulcanization, rubber, baking , Feed drying, printing and dyeing, chemical industry, plywood production, waterproofing membrane production, asphalt heating, drying noodles and other industries. (1) RY thermal oil pump is based on the digestion and absorption of foreign oil pump developed on the basis of the second generation of products, the basic structure Single-stage single-suction cantilever foot support structure, hot oil pump inlet for the axial suction, the outlet is centered vertically upward, and the motor with the base. (2) RY-type heat transfer oil pump support using double-ended ball bearing support Structure, the front end is lubricated with grease, the back end is lubricated with grease, and the middle is a guide pipe for observing the sealing condition and recovering the heat conducting oil at any time. (3) RY series air-cooled high-temperature heat-conducting oil pump adopts self- (4) RY series of air-cooled high-temperature heat-conducting oil pump with a combination of packing and mechanical seals in the form of packing used to seal High temperature filler, with good thermal adaptability, and mechanical seal is the use of high mechanical strength, good wear resistance of cemented carbide material, to ensure (5) RY series air-cooled high-temperature heat-conducting oil pump uses the third generation of polytetrafluoroethylene (referred to as PTFE) lip seal, the sealing performance has leap than the reliability of rubber sealing improved 25 Times, the corrosion resistance is extremely strong. The heat conduction oil pump uses the self-heating cooling structure, has changed the traditional water cooling structure, causes the structure to be simple, the volume is small, saves the operation expense, the performance is good, the use is reliable, is our country digestion and absorption foreign oil pump foundation Developed the second generation of products, the basic structure of the single-stage single-suction cantilever foot support structure, the import of the axial suction pump, the export center for the vertical upward, and the same motor mounted on the base. RY thermal oil pump structure RY Series thermal oil pump mainly by the shell, rotor, bearings, seals and other components, the use of packing seal structure, additional temperature oil seal, auxiliary sealing role. Pump and motor with three claw-type flexible coupling. RY series of heat transfer oil pump The pump from the design to change the traditional hot oil pump structure, the use of natural cooling cooling, reducing the pump size, so that the structure is simple, saving running costs, safe and reliable.
Led Tunnel Light,Led High Bay Light,Led Tunnel,Led Light Tunnel
Jiamei Energy(hongkong) Limited , https://www.jiameilight.com