Turning the forming surface on a conventional lathe has always been a technical problem that has plagued the engineering community. In the past, most of the forming turning devices were complicated in structure, and generally required to make major changes to some parts of the machine tool, such as pulling out the middle screw and installing a master device on the tailstock of the machine. In particular, the mastering device for processing the end face forming surface is more difficult in structural design. In addition, because the curvature change of the actual workpiece forming surface is often not satisfactory, the design is difficult due to the excessive partial pressure angle of the mold.
WUXI HOLLY Nitrile Rubber Heat Insulation Tube is a formidable tubing material used in high fuel usage environments.Nitrile tube has a concentration of Acrylonitrile-butadiene making it ideal for oils and solvents. The nitrile tubes are flexible and resilient.With such a high concentration of Nitrile in the composition of the tube, the nitrile rubber tube has limited stretching ability.
Heat Insulation Tube,Air Conditioning Insulation Tube,Heat Insulation Rubber Plastic Pipe,Heat Preservation Foam Tube
Wuxi Holly International Trading Co., Ltd , https://www.hollynbrs.com