Water life-saving equipment mainly includes floating surface life ropes , throwing ropes on the surface of the water, surface rescue trailers, water rescue stretchers , lifeboats, life jackets ( buoys ) and assault boats.
First, the surface of the floating lifeline
Water floating reflective lifeline
The floating lifeline on the surface of the water has rope joints at fixed intervals, and it is not water-absorbing and can float on the water surface. The signs are obvious and are used for water rescue. Diameter 12mm ; length 200m ; breaking strength ≥ 18kN .
Second, the surface rescue trailer
The surface rescue trailer is used for single rescue and wounded transport. The board is filled with polypropylene material. The armrests of the board are made of polyethylene material. The bottom and upper surface of the board are made of ABS plastic. Handrail runs through the board and the surface is non-slip. During the water rescue, the ship was towed to the side of the victims. The victims could grab the handrails of the rescue carriage and be quickly removed from the dangerous waters. The surface rescue trailer can simultaneously rescue multiple victims. The main parameters: length 1.7m , width 0.84m , weight 18kg .
Third, the water rescue stretcher
Basket type water rescue stretcher
Water rescue stretchers for the rescue and transportation of the wounded. Made of polyvinyl chloride, polyurethane, and nylon. There is a float on the left and right of the stretcher, equipped with a waist adjuster and a Φ 11 rope.
Fourth, water throwing rope package
The water throwing rope package is mainly used for rescue operations in the rapid waters. Rope and rope package may be floating on the water, the rope length is generally 12 ~ 22m.
The amphibious long-distance multi-function tossing device adopts an air respirator gas cylinder as an air source, a tossing device has a tail, and has good flight stability and high accuracy.
Fifth, amphibious long-range multi-function throwing device
Amphibious long-distance multi-function thrower
The amphibious long-distance multi-function tossing device adopts an air respirator gas cylinder as an air source, a tossing device has a tail, and has good flight stability and high accuracy.
1 , parameters:
Drive mode:
High pressure air drive
Caster distance:
6 mm or 8 mm different pressure flat throw: 200 meters or so
High throw: 80 meters
Weight: 15 kg
Size: 1000*220*170
2 , configuration:
Dumping a body, two cylinder emission, a high-pressure inflatable tubes, 8mm rope 200 meters (or rope 6mm) one, two cylinders emission tail, a life buoy, water, carbon dioxide and small cylinder-sensitive member, the anchor Hook, carrying case, rope bag
Six, automatic inflatable life jacket
Automatic inflatable life jacket
Automatic inflatable life jackets are mainly composed of airbags, small high-pressure gas cylinders, and automatic inflation valves. They are suitable for use at sea and waterside activities. Under normal circumstances (not inflated), the entire inflatable life jacket is worn like a harness on the person's body. This product is light and compact, and does not impede work when worn. It overcomes the bulky, stuffy, and other undesirable features of traditional foam life jackets. Once in the water, the airbag is automatically inflated and inflated in 5 seconds into a life jacket with a buoyancy of 16 kg ( SY-A150 ) or more so that the head and shoulders of the person can float to the surface to provide safety protection. Under special circumstances, when the wearer falls into a coma, it has the function of self-righting and entering the water, so that the head can be kept upturned and can provide the best safety and rescue.
Designed and manufactured in accordance with European standards EN396 : 1993 and EN396/A : 1998 , and with reference to the relevant requirements of International Standard MSC : 81 ( 70 ) and Department of Transportation Standard JT346-2004 , in accordance with the 1996 amendment to the SOLAS 74/96 International Maritime Safety of Life And the international lifesaving equipment ( LSA ) rules and MSC.81 (70) life-saving equipment tests and other standard design and manufacturing. This kind of life jacket is compact and light before inflation, comfortable and convenient to wear; after buoyancy, the buoyancy is large, the buoyancy lasts for a long time, and the water self-righting function is particularly good. It is the latest alternative to traditional foam life jackets. There are single airbags and double airbags.
1 , parameters:
1 . Airbag inflated volume: 16.5 liters
2 . Intracapsular compressed gas Weight: 33 g
3 . Inflation time: <=5 seconds
4 . Buoyancy: 16kg
5 . Capsule gas storage time: > 5 days
6 . Carbon dioxide gas cylinder: 33g carbon dioxide gas cylinder , disposable, replaceable
7 . Airbag air pressure: < 0.2kg
8 . Head and shoulders rise to the surface: 30 - 45 degrees
9 . Mouth and water distance:> 120mm
10 . With dual-tone help whistle
11 . Reflective logo: " SOLAS " high-strength special reflective film
Seven, belt type automatic inflatable life buoy
Belt type automatic inflatable life buoy
Before inflation: Like a colored belt with a width of 5 cm , it is tied to the waist during operation and exercise on the water. It does not affect movement and operation. Inflated: In case of accidental falling into water or distress in water, the water-soluble initiator of the fully automatic belt inflatable lifebuoy belt device will automatically open the valve to inflate the lifebuoy; the manual type belt lifebuoy must be opened by hand to open the inflatable valve. The high-pressure gas in the cylinder rapidly inflates the ring-shaped airbag with a stretched cloth and becomes a lifebuoy, which is placed under two feet. After inflation: Automatic type will automatically form a horseshoe or new rod lifebuoy in 5 seconds. It surrounds the waist of the drowning person and makes the drowning person float on the water, thus playing the role of lifesaving (manual type Can only be inflated by hand. The buoyancy is more than 9 kilograms . The body floats on the surface to achieve lifesaving.
parameter:
1 ) Weight: < 0.6kg ;
2 ) Buoyancy: ≥ 78.4N ;
3 ) Inflatable molding time: ≤ 5s ;
4 ) Buoyancy loss after 24 hours: ≤ 5% ;
5 ) CO2 gas weight: 17g ;
6 ) Floating time: ≥ 24h ;
7 ) Use ambient temperature: -30 °C ~ +65 °C ;
8 ) Validity: 3 years.
Eight, rapid reaction boat
Rapid reaction boat
United States Alpha No. 1 ALPHA 1 # fast response boats is the world's first lightweight strengthen the rapid response boats, the boat usually stored foldable, lightweight and easy to carry, weighing only 38kg, can be folded easily on a small roof, then to transport. The boat is extremely easy to install and can be installed in just 4 minutes. The boat overcomes the disadvantages of the rubber boat being easily punctured, scratched, and easily ageing. The use of high-tech ultraviolet allotropes and other aviation materials is safe and reliable. It not only has high strength (strength is difficult to pierce), but also has a high Buoyancy (even if the hull enters the water and never sinks). Rapidly-reacting boats adopt fluid design, which is energy-saving and environment-friendly, and has extremely low fuel consumption. It also has the advantages of acid resistance and seawater corrosion resistance. Pierce the warranty period of 10 years.
Features:
Lightweight and easy to carry: The weight is only 38kg , can be easily placed on the car after retracting, easy to transport
Easy installation: 4 minutes to complete the installation
Safe and reliable:
High buoyancy: Even when the hull enters the water, it never sinks
High strength: The hull is hard to pierce
Acid resistance, seawater corrosion resistance: 10 years warranty
Fluid design, energy saving and environmental protection. Very low fuel consumption.
parameter:
Length: 428cm
Width: 152cm
Depth: 56cm
Draft: 11.4cm
Folded size: 7.62cm (thickness before); 17.8 cm (the thickness)
Net weight: 38kg
Load capacity: 367kg
Passengers: 5 people
Material: UV ultraviolet polymer
Warranty period: 10 years
Color: Olive Green
Accessories: stainless steel, electroplated aluminum, steel
This article was edited and compiled by China Rescue Equipment Network. Please indicate the link address.
Slings Fittings,Stainless Steel Thimbles,Slings Hardwares And Fittings,Stainless Steel Wire Rope Swage Fitting
Jiangsu Hongze Stainless Steel Wire Rope Co., Ltd , http://www.hzrope.com