The method of use is the same as that of the traditional polyvinyl acetate latex. The product is resistant to freezing and thawing, aging resistance, excellent bonding strength and long storage period.
1 Wood moisture law should be controlled at 8-15%, too high or too low will affect the quality of bonding.
2 Treat the surface of the substrate so that the surface of the substrate is free of oil, dust and other impurities. The bonding surface must be in full contact.
3 Glue should be even and appropriate.
4 can be cured at room temperature or heat, the maximum temperature should not exceed 120 ° curing time varies with temperature, can be determined according to the actual situation.
5 When pressurizing, the pressure should be sufficient, the pressure should be uniform, and it should be pressurized for more than 1.5 hours. After pressure relief, it should be aged for a period of time. In order to achieve a better adhesion, it is best to leave the pressure for 24 hours and then process it for 72 hours.
6 It can be mixed with some resins, such as urea-formaldehyde resin, phenolic resin, trimeric hydrogenamine resin, etc., to improve its water resistance and creep resistance.
As large fountain manufacture in china,pool fountain is one of our main projections.The pool fountain has many modeling elements, including various Nozzles, underwater colored lights, and special pumps for fountains.The pool fountain have ultra-high spray,light, water curtain and music interweave show a spectacular side.
Pool Fountain,Solar Pool Fountain,Modern Pool Fountain,Swimming Pool Fountain
Wuxi Jinshanghua Environmental Equipment Co., Ltd , https://www.jshfountain.com