WIFI device mobile phone function and performance test platform

WIFI device mobile phone function and performance test platform

Technical specification



One,         Test platform equipment composition

The WiFi device manual function and performance software test solution is based on the Veriwave WaveTest hardware platform, which is composed of WiFi device manual function and performance test software and WIFI terminal control software.

two,         Equipment requirements

1,              WiFi device manual function and performance test software

1)   Main uses and functions :

-          Provide independent and accurate 801.11 control and management panel and data panel to support sending and receiving frames without WIFI Client and AP association;

-          Highly interactive interface, you can change the WIFI test network status at any time by increasing the speed of various WIFI users and changing the flow rate , and view the impact of changes on the test results in real time through graphs or tables;

-          Generic or custom traffic can be generated, UDP and TCP streams are supported, and custom packets are supported to simulate the flow of exceptions. Custom streams and preset streams can be generated and sent simultaneously. Can be used for DOS attack testing and testing whether the AP can correctly handle abnormal packets;

-          Integrated error problem location feature. Provide detailed diagnostic information to help locate analytical problems. It also provides data capture and parsing capabilities to view information at the physical layer and logical link layer.

2)   Main technical requirements:

Ethernet rate auto-negotiation	Open, forced or manual
Ethernet rate	10/100/1000Mbps
Duplex	Full / half duplex
802.11 channel	1-14, 21, 25, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124,   128, 132, 136, 140, 149, 153, 157, 161,   165 or follow the terminal configuration
802.11 competition conflict	On / off
Port statistics	All counters will count the data stream accordingly
User association request method	Unicast / multicast / broadcast
Basic statistics	TX/RX frame number, FCS error, TX error, retransmission, failed ACK , port Rate, delay information, etc.
summary graph	Graphical results for each port can be displayed independently
802.11 user type	11ag/11b/11n
Abg setting	Data transfer rate, management frame rate. Transmit power, packet error rate
11n supported MCS	0-7
11n bandwidth	20/40MHz
11n GI	400/800ns
11n frame aggregation	On / off
11n channel model	6 models defined by Bypass or TGN
Spontaneous CTS	On / off
Management frame retransmission	0-10
Data frame retransmission	0-10
User re-authentication	On / off
Announce WMM	On / off
Energy saving	On / off
Energy-saving listening interval	1-65535 beacon interval
WMM uAPSD	On / off
Authentication	Open PSK WPA WPA2 DWEP LEAP
encryption	None WEP40 WEP104 TKIP AES-CCMP
Vlan tag	On / off
Vlan ID	0-4094
Vlan CFI	On / off
Address allocation method	Static /DHCP
ARP timeout setting	1-20000ms
Subnet mask	0-32
Traffic type	IP/ custom
Expected load	1-1488095
Frame length	64-1518bytes
L4 agreement	ICMP/TCP/UDP
TCP source port	1-65535
TCP destination port	1-65535
TCP window	2-65535
UDP source port	1-65535
UDP destination port	1-65535
ICMP packet type	Echo request, echo reply, destination unreachable, source quench, redirect
ICMP plus code	0-255
Message content mode	Fixed / repetitive
Message content	Custom , all 0, all 1, F0: F0: F0: F0, A0: A0: A0: A0, 70:70:70:70, or 50:50:50:50
WMM priority	0-7
WMM EDCA parameters	Read from the broadcast information of bss or pre-specify AIFSN , ECWmax, etc.
IP differentiated service	On / off
IP DSCP	0-63
Statistical table	Multiple stream statistics are presented in tabular form
Number of streams in the table	1-16

2,              WIFI terminal control software

1)   Main uses and functions :

-          It can be loaded on the wireless WIFI terminal to control the terminal to send and receive statistical traffic, and can calculate the forwarding rate, packet loss, delay, and jitter;

-          Support operating systems: Windows XP , Windows Vista , Windows Mobile 6 , Linux - 2.6 ;

-          Support for sending and receiving TCP and UDP streams

-          The test port of Wavetest can be controlled to generate traffic to the object to be tested, and the calculation of the test result is not affected by the upper layer operation, and is not affected by the hardware configuration of the object to be tested and the operating system.

three,         Online bidding software option

product name	unit	Quantity
WiFi manual function and performance test software	set	2
WIFI terminal control software	set	2

four,         Equipment bidding and arrival period

Bidding vendors must have the capabilities provided by all of the above software in order to bid

The equipment should arrive within 90 days of the contract being signed into effect.



Annex A

Product after-sales service commitment



1.         The buyer may file an objection within one week from the date of delivery;

2.         The software of the same model shall be upgraded free of charge for 3 years from the acceptance of the acceptance ;

3.         The same type of software includes 3 years of upgrade software should be permanently guaranteed;

4.         Lifetime maintenance of the products sold, beyond the warranty period, product software upgrades with the same model, Party B charges Party A 15% of the software price ;

5.         During the warranty period, the product fails, the company responds within 24 hours, and the repair is completed within 10 days after receiving the repair machine . Otherwise, it promises to provide the equipment for free, without paying any fees;

6.         The following conditions are not covered by the warranty:

a)        Abnormal damage such as unexpected events, natural disasters, resulting in non-recoverable damage to the product,

b)        The product is obviously damaged by lightning, water ingress, wear and the like;

c)         Malfunction or damage caused by improper operation, such as sprinkling liquid, external force extrusion, falling damage, incorrect connection with external equipment, etc.

d)        After the failure of the contract product, Party A may disassemble, modify, disassemble, assemble, or repair the product without authorization, resulting in failure to identify the fault liability;

e)        Other circumstances in which the contract product is damaged due to Party A's reasons.

If any of the above occurs, Party A shall be responsible for it; if Party B is required to carry out maintenance or technical support, all costs incurred shall be borne by Party A.

7.         Warranty method: If the product fails, Party A shall be responsible for transporting the product to the designated repair location of Party B, and Party B shall be responsible for the repair.

8.           Party B provides free product consultation and training to Party A.

High Speed Door Accessories

About high speed Door Accessories:

1.Driving system: High Speed Door Servo System motor and control, motor SNMA / SEJ +reducer+flang+encoder+control box

2.Other accessories: Middle aluminium bar, bottom aluminium bar, aluminium vertical track, stainless steel vertical track, brushes,round nylon strip, PVC roll, rolling steel tube complete, drum be;;s for rolling tube, side end covers, stainless steel cover, steel tubes, air bag sensor system, safety light beam, Microwave sensor 24 Gigahertz,PVC welding machine, smoke and fire sensors, PVC transparent window, magnetic loop, photocell, remote control, manual push button, sound warning alarm Led lamp traffic light

For some main accessories, here is detain introduction:

1).24G radar sensor:

Brand: Hofic

Technology: Microwave processor

Maintain time: 0.5s

Protection: IP54

Transmitting frequency: 24.125GHz

Maximum installation height: <5meter

Transmitting power density: <5mw/cm2

Power consumption: <1W(VA)

Installation angle: 0-90°(lengthways) -30-30°(crosswise)

Supply voltage: AC&DC 12V-30V

2).Photocell:

Approval CE & ISO9001

Power supply AC/DC 12-30V

Static current 25A

Action current 40mA

Mounting distance Max 10m

NO or NC contact Done by NO./NC. contact selection

Working environment temperature -42℃ to +45℃

Working environment humidity 10 to 90%RH

Appearance dimensions( controller) 123*50*32mm(L*W*H)

Appearance dimensions(Magic eye head) 19*13mm(L*D)

3). Remote control

Operating Voltage: AC220V/50HZ+-20%

Transmit power:≤100mW;Super regenerative module, strong anti-interference

Operating temperature:-30℃-+70℃

Working frequency: 433MHZ;transmitter 1527, millions of encoding chip

Accept sensitivity:≤110dB

Manipulation method: electric remote control

Configure the quantity: Wireless number; factory configuration transmitter two. Can be equipped with PT2272 digital decoder chip

Configure the function: Up, down, stop, anti-lock full-featured reproduction

4). Magnetic loop

Voltage: 12V AC/DC +-10% 24V 115V AC+-10% 230V

Power: <2VA

Continued electrical output: 7A / 250V AC

Frequency range: 20 to 200K Hz

Response time: infinity (factory setting) or adjust maintain time

Sensitivity: 0.01% to 0.1% divided into 3 levels

Protection level: IP30

Electromagnetic compatibility (EMC) Complies with EM50081-1 and EN50082-2

Detection loop inductance: the limit of 40uH to 100uH ideal value 80uH to 300uH

Operating temperature: -25 ℃ to 70 ℃

Storage temperature: -40 ℃ to 85 ℃

Relative humidity: <90% non-condensing

Temperature compensation: automatic compensation up to 50 ℃ / h

Connection type: 11 pin DIN rail socket

Dimensions: 41 * 78 * 85 mm (width * height * length)

Weight: 250 grams

5). manual push button

This exit switch button is made of ABS and has built-in indicator light make it looks more elegant and fashionbale. It can be widely used in public entrance gates, public door, home, office, hotel, etc.

Door Exit Button Push To Exit Switch Door Opener For Access Control Security

Main Feature

Fashionable appearance

Made of ABS Plastic

Easy to install and operate

Used for access control

Specification

Mechanical Life: 500,000 test

Material: Plastic

6). Limit switch encoder

Voltage: DC5V-24V

Output voltage: high voltage≥85%Vcc, low voltage≤0.5V

Maximum mechanical speed:6000rpm

Anti-vibration: 50m/s,10-200HZ,XYZeach way 2 times.

Current consumption:≤30mA

Response frequency: 0-100KHZ

Protection: waterproof,oil proof,dust prevention, IP54

The output code system: binary code

Operating life: MTBF≥30000(+25℃,2000rpm)

Rotational inertia:4.0x10-8kgm²

Maximum load:radial direction20N

Axial direction:10N

Weight: about 0.4kg

High Speed Door Accessories,High Speed Door,Electronic High Speed Door Accessories

Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hffastdoor.com