Acetate cloth tape series:
YJC-810H-2, YJC-810B-2,
Description:
The acetate cloth tape is made up of acetate cloth as a carrier and a single side with an acrylic glue series adhesive. A flame retardant is added to the flame retardant acetate cloth tape;
Construction:
Acetate cloth
Acrylic glue
Release paper
Flame retardant
Features:
-- No residue after tearing.
-- Excellent adhesion to adhesives without primer treatment.
-- This series has excellent initial adhesion with a special adhesive.
Applications:
Composite materials for interlayer insulation and bundling of transformers (especially high frequency transformers, microwave oven transformers), fixing of local zero parts of ceramics, winding of ceramic heaters and quartz tubes, etc.
Technical Data:
Product property
Product Name Substrate (mm)
Glue total thickness (mm)
Peel force (g/in)
Applicable temperature (°C)
YJC-810H-2
0.19
Acrylic 0.22±0.01
>800
0-80
YJC-810B-2
0.19
Acrylic 0.22±0.01
>800
0-80
note:
1. The total thickness is based on the absence of release paper.
2. This watch is the purchase guide for the acetate cloth tape series, and it needs to meet the actual measurement data standards of each engineering unit.
3. Test environment: temperature 23 ° C -25 ° C, humidity 60% -80%
4. Test method: peeling force using PT-7010
Adhered body: Stainless steel plate Tape width: 25mm Tensile speed: 300mm/Min Tensile angle: 180°
Application Techniques:
-- Remove oil, moisture, dust and other debris from the surface of the sticker.
-- Due to the use of pressure-sensitive adhesives, it is necessary to use a roller or a punching device to apply sufficient pressure when pressing.
-- Since the adhesive force of the tape itself takes a certain amount of time to fully exert its effect, please be careful not to subject the tape to a large pressure for at least several hours after pasting.
-- When using, please pay attention to the initial adhesion and timely change, and make full confirmation beforehand.
Storage:
-- Be sure to store it in the original packaging or in the original box.
-- Please choose a dark place that is not exposed to direct sunlight for safekeeping.
Consideration before use:
note
-- The above product data is the average of the general test results of Fuge Laboratories, and the product description is based on our understanding of the actual, only for your customer's reference, not the product acceptance criteria. When using Xinfuge products for a specific application, many factors that can affect the performance of the products are controlled by our company, such as the time of use, environmental factors, and usage. Since these conditions are only fully understood and controlled by the user, please test and evaluate the product yourself to determine if it is suitable for your application and usage.
-- Different stickers and different bonding conditions may cause peeling and other phenomena.
This article is edited by Xin Fuge Shen.
Sectional Door Accessories: motor 220V-380V, control box, spring break device, cable break device , aluminum alloy rope pulley, enhanced shaft bracket, air bag system, duplex enhanced guide wheel bracket.
Detail introduction for above main accessories
1.Motor and controller:
The garage door operator is designed for residential overhead sectional and tilt doors.
The operator memorizes the limit positions and unique braking system that slows the unit down at the end of its travel.
Rolling code remote control with max. 20 pcs hand transmitters.
The operator is equipped with a manual release lever which allows manual operation of the door in case of power failure.
The controller has a security LOCK function which prevents operation of the door from transmitter.
2.spring break device:
Sectional doors are hinged and they bend in the tracks as the door opens and closes. Many of these doors are counterbalanced with extension springs, also designated "stretch springs," and they have seven characteristics. The length is the measurement of all the coils pressed together. This, along with the inside diameter of the coils and wire size - the thickness of the wire from which the springs are made - determine the stretch, the distance the spring is extended - normally half the door height, and pull, the force the spring pulls when stretched its normal length. The type of ends determine how the ends of the spring are mounted. The initial tension is the percentage of pull needed to separate the coils. This is determined by the pitch with which the springs are wound. On sectional garage door springs this is normally 15 percent. For example a 100 pound pull spring requires 15 pounds of weight to separate the coils; when a door is open the two springs will support 15 pounds of door weight without any stretch.
Most extension springs are made of oil tempered wire. These are normally coated or painted. Some springs are made of galvanized wire.
3.able break device:
cable break device ,door hardware
adjustable bottom bracket .
the raw material hot plate
zinc plated
safety device
adjustable bottom bracket
the raw material hot plate
zinc plating
spring safety device ,2" and 3" safety device
once the cable is broken ,this devoice can keep the hurt away from the door falling
4.aluminum alloy rope pulley
Equipment: CNC stamping/punching machine, CNC bending machine, CNC cutting
machine, 5~250 tons punching machines, welding machine, polish machines...
Processed material: stainless steel: copper, carbon steel
Surface treatment: Hot galvanized, polishing
Making process:Stamping, deep drawing,bending, punching, laser cutting,threading,
welding, tapping, riveting, grinding
5.air bag system
It is a safety device. When the door is down to hit something, it will up automatically.
Operation pressure:<3mbar
Battery:CR2032*2
Battery lifetime>1 year
Emission frequency: 315MHZ
Emission power:<10mW
Receiver power source:12V
6.duplex enhanced guide wheel bracket
Determining the right type of sectional door roller for your garage door tracks can be a little confusing, especially when you do not know what you need to look for in a garage door roller. To simplify things, there are two primary things you need to be aware of. First are the actual dimensions of the roller, and second is purpose that you will be using the door for. You can read below about measuring your roller and choosing the right quality of material for your door.
Other Door Accessories,Electronic Door Accessories,Automatic Door Accessories,High Speed Door Radar Detector
Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.highspeedshutterdoor.com