The widespread use of air compressors not only reduces labor costs, but also significantly increases the company's production efficiency. It is because of this advantage of air compressors that its technology in laying pipelines is very fulfilling. why? Reasonable piping design and laying can reduce the waste of compressed air in the air compressor, reduce the user's cost, and extend the life of the equipment. Therefore, what kind of knowledge should users pay attention to when laying air compressor piping?
1. When the air compressor is equipped with pipes, the main pipe must be slightly inclined to discharge the condensed water in the pipes. The pipeline should be equipped with a drain valve and it should be discharged regularly.
2. The pressure on the pipeline should not exceed 5% of the pressure of the compressor, so you need to choose the right diameter in the pipeline.
3, laying the pipe should be as short and straight as possible, to minimize the use of elbows and various valves, connectors, in order to reduce pressure loss.
4. The bypass pipe must be removed from the top of the main road to avoid the flow of condensate from the main road to the condensing unit.
5. The main pipeline must not be arbitrarily reduced or enlarged. If you have to reduce or expand, you must work with a reducer. Otherwise, it is easy to assume that the pressure increases, causing a great deal of pressure loss. At the same time, the service life of the pipeline is greatly reduced due to the impact pressure of the gas.
6. Consider pressure loss due to long-term pressure loss. More ignited plants, laying an annular water supply pipe. The diameter of the pipe is two to three times the diameter of the air compressor outlet. If necessary, the ring pipe can be installed in the middle of the pipe.
Therefore, the pipeline installation of air compressors has also been studied. Correctly handling the problems of air compressor pipelines can reduce the waste of resources to a certain extent, reduce the cost of use, improve the production efficiency of enterprises, and can bring considerable benefits to enterprises. The proceeds.
1. When the air compressor is equipped with pipes, the main pipe must be slightly inclined to discharge the condensed water in the pipes. The pipeline should be equipped with a drain valve and it should be discharged regularly.
2. The pressure on the pipeline should not exceed 5% of the pressure of the compressor, so you need to choose the right diameter in the pipeline.
3, laying the pipe should be as short and straight as possible, to minimize the use of elbows and various valves, connectors, in order to reduce pressure loss.
4. The bypass pipe must be removed from the top of the main road to avoid the flow of condensate from the main road to the condensing unit.
5. The main pipeline must not be arbitrarily reduced or enlarged. If you have to reduce or expand, you must work with a reducer. Otherwise, it is easy to assume that the pressure increases, causing a great deal of pressure loss. At the same time, the service life of the pipeline is greatly reduced due to the impact pressure of the gas.
6. Consider pressure loss due to long-term pressure loss. More ignited plants, laying an annular water supply pipe. The diameter of the pipe is two to three times the diameter of the air compressor outlet. If necessary, the ring pipe can be installed in the middle of the pipe.
Therefore, the pipeline installation of air compressors has also been studied. Correctly handling the problems of air compressor pipelines can reduce the waste of resources to a certain extent, reduce the cost of use, improve the production efficiency of enterprises, and can bring considerable benefits to enterprises. The proceeds.
Garden Light,Solar Garden Wall Light,Outdoor Garden Lights,Garden Lamp Post
NINGBO ZHENGUO INTELLINGENT LIGHTING CO.,LTD , https://www.zguolight.com