Example 3 <br> <br> the program is loaded, the corresponding data in accordance with prompts AutoCAD window following command line, the fault can instantly draw a schematic cross-sectional lines, and write the number and occurrence of the fault in the form of individual text, And in the text window, the angle of inclination of the fault in the section view, and the relationship between the tendency of the fault and the direction of the section are listed. For example, the section direction is 30°, the fault number is f20, and the occurrence is 45°NW∠60° (note the writing style of the birth), the ratio of the X direction is “1:1000â€, and the ratio of the Y direction is “1:500â€. ".
(1) After entering the command "yfapm", press Enter;
(2) Enter the section direction "30" (in degrees) and press Enter;
(3) Enter the fault number "f20" and press Enter;
(4) Enter the fault direction "45" (unit is degree), enter;
(5) The tendency to input the fault "nw" (all uppercase and lowercase, the program automatically converts to uppercase), enter;
(6) Input the inclination of the fault "60" (in degrees), enter;
(7) Enter the denominator of the ratio of the profile in the X direction and press Enter. If the ratio is "1:1000", enter "1000". For the first time, the default is “1000â€, and the variable has a memory function (ie, directly enter, the value of the variable is the last value entered);
(8) Enter the denominator "500" of the proportional view in the Y direction and press Enter. Same as above;
(9) Specify a point on the map, which is a point through which the fault passes, and the general point is on the topographic line of the section view.
4 Conclusion
Due to the limited space, some steps have been omitted, such as judging the correctness of the input tomographic data. However, according to the prompt of the command line below the AutoCAD window, the data is correctly input, and the drawing result is the same. If you need a full version to send an email to "", I will send it to you as soon as possible. If there are any deficiencies, you are welcome to advise.
Previous page
M12 Right Angle Die Grinder,Parkside Cordless Angle Grinder,Battery Operated Angle Grinder,Cordless Right Angle Die Grinder
Suzhou ZhaoCheng lithium technology Co., Ltd. , https://www.scans-tools.com