22 oil storage depots in Beijing have recovered 20,000 tons of oil and gas every year from the “gasoline volatilization†link. Recently, the oil and gas recovery devices have promoted intelligent management to achieve energy reduction while saving more than 25% per day. The recovery device uses activated carbon to adsorb oil and gas. After being treated by a vacuum pump, it is cooled into the spray tower to reduce the temperature. The oil that has evaporated due to the temperature rise returns to liquid gasoline. Recently, the device is intelligently managed, and by connecting with detectors installed at each oil outlet, the system can obtain real-time fueling vehicle intensity, thereby adjusting the operating intensity. After initial adjustment, the current oil and gas recovery equipment consumes between 280 and 300 degrees of electricity a day, saving more than 25%.
Exterior Porcelain Tile size: 1800x900mm, 1500x750mm, 1200x600mm, 800x800mm, 600x900mm...
Thickness: 5.5mm-12mm
Characteristic of Outdoor porcelain tiles
1. Light and thin, saving raw material resources, and reducing overall consumption, reducing the load of the building itself, the effect of high-rise building engineering is more obvious.
2. Water absorption rate <0.1%, no cracking phenomenon, Exterior Wall Porcelain Tile have superior physical properties, sturdy and durable, good weather resistance and long service life.
3. Exterior ceramic tile is easy to clean, fireproof, water resistant, wear resistant, corrosion resistant and low maintenance cost.
4. The color is rich and stable, and the Exterior Wall Ceramic Tiles surface has various effects. The exterior wall tile surface has a variety of textures, whether it is shiny or flat or rough, and has a rich and varied design and a strong decorative effect.
5. Easy to cut. For some large walls, large
Exterior Porcelain Tile Cladding has a better
visual effect. Designers can also cut large-sized tiles according to their
design needs, and cut and process them to get the most suitable tiles.
Application construction system
1. Tile adhesive construction: use a serrated boring tool to evenly scrape the cement-based adhesive on the construction base layer, then press the porcelain plate into the adhesive, tapping with a wooden pole, a rubber hammer, etc., so that the tile and the adhesive stick more firmly.
2. Building porcelain panel dry-hanging system.
3. Construction porcelain decoration insulation board construction system.
Exterior Porcelain Tile
Exterior Porcelain Tile,Exterior Ceramic Tiles,Exterior Wall Porcelain Tile,Exterior Wall Ceramic Tiles,Outdoor Porcelain Tiles,Exterior Porcelain Tile Cladding
UMS New Materials Industry Co.,LTD , http://www.ums-factory.com