First, the thickness of the cabinet plate
At present, there are 16 mm, 18 mm and other thickness plates on the market. The service life of cabinets made of 18 mm thick plates can be more than doubled to ensure that the door panels are not deformed and the countertops are not cracked. When consumers look at the samples, they must carefully understand the composition of the materials and be aware of them.
Second, whether it is a separate cabinet
The entire set of cabinets will affect the fastness, so consumers should ask when purchasing the whole cabinet, the service life and stability of the two are two to three times different, and the cost difference is 5%. Consumers can be identified by packaging and installed cabinets. If separate cabinets are assembled, each cabinet should have a separate package; consumers can also observe it in front of the cabinet.
The cabinet with anti-mite silent edge sealing can alleviate the impact force when the door is closed, eliminate the noise and prevent the insects from entering, and the cost of the anti-smashing edge is 3%. Also check whether the countertop, the door panel, the box and the sealing strip, and the anti-collision strip are processed by the machine film, whether it is pressed on both sides. The sealing strip is not tightly closed, which may cause oil smoke, dust and insects to enter.
Third, the composition of the artificial stone
The materials suitable for the kitchen countertops include fireproof panels, artificial stone, natural marble, granite, stainless steel, etc. Among them, the performance price of artificial stone countertops is the best. The cheap tabletop calcium carbonate is high in composition and easy to crack. At present, more used in the market is composite acrylic, pure acrylic and so on. The composite acrylic component is generally in the best ratio of about 20%.
Fourth, whether the artificial stone is dust-free installation
In the past, many manufacturers will carry out artificial stone grinding at the installation site, causing environmental pollution in the living room, which is unexpected for consumers. Some leading cabinet manufacturers are now aware of this. If the cabinet manufacturer you choose is dusty, you must choose to install the countertop before the floor and paint enter the site, otherwise you will have to spend money to do the second cleaning.
PF MOLD uses decades of experience in manufacturing unscrewing plastic injection molds. The output is molds that are used for the production of internal threaded plastic injection parts. External threaded plastic injection do no need to be produced using unscrewing injection molds.
Detailed threads on the Plastic Parts cannot be easily removed from the mold using traditional knock-off, so unscrewing plastic molds have gained popularity not only for its quality but also as a means for cost savings. Unscrewing plastic injection molds can be more complex in design than most plastic injection molds
The molds are operated at high speed to realize faster cycle times. To prevent damaging the threads on the plastic part during production, unscrewing plastic injection molds are being used by the industry.
Unscrewing is widely used for plastic parts that require high volume of output during production. It also prevents damaging the threads on the plastic parts during production. We make unscrewing plastic injection molds to produce high quality parts such as:
Automobile Industry parts
Bolts and Nuts
Bottle caps and closures
Cosmetics containers
Consumer products packaging
Lids
Medical supplie
Personal care products
Side Base Plastic,Precision Plastic Mold,Plastic Injection Molding,Perfect Mold
PF Mold Co., Ltd. , http://www.pf-mold.com