There are a lot of open plastic products factories, or friends who need chillers to cool the circulating water and circulating oil used in the machine. When buying industrial chillers, they often don't know what type of chiller to use to achieve their required cooling effect. Or do not know what kind of machine is more suitable for their own production workshop.
I want to tell you some simple selection methods. I hope I can help my friends.
First of all, we have to figure out which types of chillers are divided: General manufacturers will produce both water and air cooling.
The air-cooled chiller contains a heat-insulating water tank and a water pump in its body, eliminating the need for an additional cooling tower to dissipate heat. Installation and movement are very convenient. However, it requires a high working environment. First, because it is cooled by hot air circulation. Therefore, if the ventilation effect of the installation workshop is not good, it will directly affect the cooling effect of the chiller. In addition, if you want to put the chiller in a dust-free workshop with humidity requirements, then I advise you to modify the water cooling. Because of the air-cooled chiller, water vapor is sprayed on the top of the machine to dissipate heat.
Water-cooled chillers can be divided into open type, sealed type (some called box type) and screw type. First of all, it must be stated that the water-cooled chiller must be additionally equipped with a cooling tower and a water pump to extract hot water for heat dissipation. In order to achieve a good cooling effect.
The open chiller has to be equipped with a separate water tank. The seal type is not necessary because it has a built-in water tank. The open type is usually installed somewhere outside the workshop. It is easy to repair, but because it is not beautiful, it is A sealed water-cooled chiller was produced, which is popular because it is a box structure. However, if you have a very large demand for cooling capacity, you should use a screw-type chiller. At this time, we will generally call it a chiller.
Concerned about surprises
Label: How to choose a chiller
Previous: Dryer selection basics Next: How to buy vertical injection molding machine
Tension Spring,Customized Tension Spring,Spring Tension Standard,Customization Of Tension Springs
Dongguan Jiufukai Hardware Products Co., Ltd , https://www.jfkspring.com