Wooden doors are used by every family. However, when manufacturers do not provide free on-site installation services, they can only install them themselves. Therefore, it is very practical to learn how to install solid wood doors . Today, let the decoration home decoration network Xiaobian to introduce it to everyone!
First, the installation conditions
1. The installation site should keep the environment clean and tidy, and cross work is strictly prohibited.
2. When installing the wooden door, the method of preserving the opening must be adopted.
3. The wooden door shall be installed after the installation of the groundwork at the entrance of the hole, and after the wall surface putty is scraped and smoothed.
4. The humidity of the installation wall should be less than 25%. If the humidity is greater than 25%, the moisture barrier must be installed on the installation wall.
Second, the installation tool
The installation tools that need to be prepared include: electric hammer, electric drill, woodworking hoe, flat boring, plane, fine tooth saw, screwdriver, square ruler, tape measure, level ruler, hanging wire hammer, stamper, hole opener, drill of corresponding specifications.
Third, the installation materials
The installation materials that need to be prepared mainly include: iron piece connector, 25 and 20 self-tapping screws, 60 nails, 502 glue, towel or cotton yarn, pig hair brush, wood cutting, small wood strip, milky white glue, styrofoam, door lock , door suction, hinges, wall moisture insulation materials, etc.
1. Assemble the door cover.
First, according to the back of the door cover and the vertical plate, the joints should be aligned. It should be noted that the nozzles should be kept on the same plane, and then the joints should be glued.
2. Install the door cover.
Put the assembled door cover into the door hole as a whole, and use the small wooden strip to fix the surrounding of the door cover. Pay attention to the two sides of the door cover should be kept on the same plane as the wall. Check whether the whole door cover is perpendicular to the ground. Whether the two corners of the two vertical plates are at right angles, whether the door panel vertical plate is bent, and then twisting the two ends of the iron piece to wrap the wall.
3. Install the door leaf.
Open the hinge slot first. Note that the distance between the hinge slot and the door leaf is generally 1/10 of the height of the door leaf.
4. Install the door lock.
After installation, carefully check whether the door and door lock switches are flexible and whether the seams meet the specifications.
5. Install the door cover line.
Cut the line of the door with a right angle to a 45-degree angle, trim it with a woodworking planer, insert the right-angle side into the door pocket, and use the floor glue to stick the door line to the door panel.
6. Install the door suction at the corresponding position.
The above is the decoration of the decoration home network Xiaobian for everyone to introduce the whole content of the solid wood door installation , I hope that I can learn after watching! More exciting content, please pay attention to the decoration encyclopedia section!
A Lampholder Lamp Socket, also known as a lamp socket or light bulb socket, is a device that holds a Lighting Productbulb and connects it to an electrical circuit. It typically consists of a base, which is connected to the electrical wiring, and a socket, where the light bulb is screwed in. Lampholders come in various types and sizes to accommodate different types of light bulbs, such as incandescent, fluorescent, or LED bulbs. Lampholder Lamp Socket as the Lighting Accessories are commonly used in lamps, light fixtures, and other lighting applications.
Porcelain Socket,Ceramic Lampholder,Phenolic Socket,Bakelite Socket
Zhengdong Lighting Co., Ltd. , https://www.sundint.com