Air drying facilitates water evaporation
Most people think that winter is too cold is not conducive to decoration, but winter decoration also has its benefits, such as dry weather, which is conducive to the evaporation of water during the decoration process. In addition, the northern family has heating, and the new house in winter is also good for drying. It is faster to dry than other seasons, especially the walls, and the temperature can be kept at a relatively balanced level.
Intermittent construction is easy to spread
Winter decoration often produces some New Year's projects due to the Spring Festival, and may not be constructed for 20 to 30 days. At this time, it is recommended to tiling the wall before the work stoppage, but the paint part should only be used as the base layer. For example, the putty, the primer and the top coat should be brushed after the start of the year.
Because the temperature in the home rises after heating in winter, the climate is dry, and the moisture in the wall is accelerated when it is discharged. When the paint on the surface layer is completed before the construction, the film covers the surface and easily cracks. If you live at home at this time, the room will have a relatively good humidity, but the house that is usually installed will not be accommodated immediately. Therefore, it is recommended that consumers paint again in the coming year, which is also beneficial to the volatilization of harmful gases such as formaldehyde, and is also good for odor.
More professionals to choose from
Winter is the off-season of decoration, home decoration designers, project managers, construction teams have more time, consumers have more choices. In the past, some experienced foremen and design teams were too busy to provide services. They were idle during the off-season, and consumers could pick up more sophisticated and more sophisticated home improvement designers. Workers serve themselves.
Fuwu network decoration reminder:
Try not to use antifreeze
Nowadays, many renovations are on-site mixing of cement mortar. The indoor temperature is guaranteed to be above 0 degrees Celsius. Generally, there is no need to do antifreeze treatment. However, before mixing the cement mortar, the sand placed outside should be screened once or twice to avoid temperature. Too low to produce agglomeration. Try not to add antifreeze because most antifreezes are not environmentally friendly.
Buy building materials in advance
Some consumers think that buying building materials at the end of the year will save more money. In fact, the purchase of materials for winter decoration, especially the purchase of main materials must be advanced, because the annual material manufacturers have a relatively early holiday, the logistics cost will increase next to the Spring Festival, so try not to delay too late. Generally, in January, some manufacturers will raise prices, mainly because of the rising cost of logistics and warehousing. Manufacturers do not want to stock up again. The supply cannot keep up, and the goods are out of stock and out of stock. It is also troublesome to decorate.
Different tiles are treated differently
Part of the floor tiles and tiles should be soaked in water before being paved in winter to make the water saturated. When bonding, it will not be weakly bonded to the cement due to the suction water, and there will be empty drums and falling off. However, the tile requirements of each brand are different. Workers must read the instructions carefully. Some bricks cannot be soaked in water, and some bricks must be soaked in water. Bricks that need to be soaked in water must be soaked. Some workers just stick it when they are wet in the water, which may cause hidden dangers. Some bricks do not need to be soaked in water. Once they are soaked in water, they must be dried before they can be laid. Therefore, in order not to delay the decoration, the workers must carefully read the instructions of the tiles.
All our grommets and washers are manufactured from the best raw materials. We carefully choose the best brass to sustain our quality standards. Our brass-made grommets can be used safely outdoors.Zonglan continues to be respected as an innovative eyelet machine designer, brass eyelet manufacturer and exporter.
Zonglan maintains its leading position in the market by achieving extremely short lead times, thanks to its vast supply of off-the-shelf products. We are proud of our advanced supply chain management system, which allows us to make fast shipments. In last 5 years, our shipment lead time has been an average of less than 5 days.
Thanks to our strict quality assurance system, we take pride in having a reputation for consistent product and service quality that does not compromise our competitive pricing strategy. As a result of our decades-long and never-ending efforts to supply [problem-free" products, we are proud to carry a brand name that has become a symbol of reliability in our industry.
Eyelets and Grommets,Grommet Machines,Self Piercing Banner Eyelets,Self Piercing Eyelets
NINGBO ZONGLAN MECHANICAL AND ELECTRICAL EQUIPMENT MANUFACTURE CO., LTD , https://www.zonglaneyelet.com