When we use the filling machine at different times, the focus is different, because the weather and temperature brought by the season are different. Now it is summer and autumn, so we need to know the filling machine at this time. Maintenance matters.
The summer and autumn seasons are hot and rainy. At this time, it is a kind of battle for all kinds of machinery, as is the filling machine. Despite the development of technology, many parts of the filling machine are made of stainless steel, but there are still many places where steel is used. Therefore, in this hot and rainy season, the filling machine is easy to appear. Wrong.
Stainless steel only has a layer of alloy steel. Under normal circumstances, the appearance of stainless steel will not present any problems, but when it comes to sharp objects, stainless steel is easily scratched, and the scratches are easily rusted. The goods bring quality pollution. If there is stain on the outside, use alcohol to wipe. Then wipe with a special oil on the part where the machine does not touch the material. The cylinders of the filling machine are now lubricated at the factory, so try not to disassemble the cylinder or add any smooth oil. The sealing ring of the filling machine should be paid attention to, and if it is worn out, please replace it in time. The filling cylinders of the filling machine, the stainless steel tees and the three-way steering valves are usually detachable, and the cleaning time can be removed and cleaned. After washing and disassembling, install it according to the original orientation, and then try it out to see if there is any abnormal situation. If everything is normal, you can start production.
In addition, in summer and autumn, the hot and humid climate is also a breeding ground for bacteria. Therefore, the filling machine should be disinfected frequently, especially in the beverage profession. When using the filling machine, it is necessary to pay attention to disinfection and avoid the reduction of oxygen. The filling of the filling machine pipe is maintained at all times. Any pipe, especially the pipe that is in direct contact with the material, should be cleaned at least once a week.
This article is written by Shenyang Dongtai filling machine, please indicate the source: http://
Washers To The Bolts,Flat Washer DIN125 M10,Flat Washer DIN125 M8,Flat Washer DIN125 M6
Jiangsu Minglu Stainless steel Co.,ltd , https://www.minglufastener.com