The important helper for opening and closing the door - hinge
Hinges are what we commonly call hinges. In the frequent switching process of cabinet doors, hinges are the most tested. Most of the current market is detachable, divided into two parts of the base and buckle.
Hinges generally have two card slots and three card slots. The three-position card hinge is certainly better. The hinged steel is the most important thing. If it is not selected well, after a period of time, the door panel may tilt forward and slip backwards. Most of the brand's cabinet hardware uses cold-rolled steel, and its thickness and toughness are perfect. In addition, multiple-positioning hinges should be selected as much as possible. The so-called multi-point positioning means that the door panel can stay at any angle when it is opened, and opening will not be laborious, nor will it be suddenly closed, so as to ensure the safety of use, which is particularly important for lifting cabinet doors.
The deciding factor of drawer sliding - slide
Whether the drawer can be pushed and pulled freely, pushed to what extent, how heavy the load, will not tilt, rely on the support of the slide rail. From the current technology, the bottom rail is better than the side rails, and the overall connection with the drawer is better than the three-point connection. Drawer slides vary in material, principle, structure, and process, with high-quality slide rail resistance, long life, and smooth drawers.
When selecting the cabinets, the quality of the slide rail steel is also the most important. A good cabinet drawer can be pulled out completely without falling off, and the disassembling is simple. Different specifications of drawer steel have different thicknesses and different bearing weights. It is understood that imported brands have a 0.6-meter-wide drawer, the slide rail steel is nearly 3mm thick, and the load-bearing capacity can reach 40-50 kilograms. Plastic pulleys, steel balls, wear-resistant nylon are the three most common pulley materials. Among them, wear-resistant nylon is the top grade. Due to the use of DuPont technology, this type of pulley has the characteristics of smooth sliding, quiet, and soft rebound. You can pull out the drawer when you buy it, and use your hand to press slightly on it to see if it will loosen, make a noise, or flip.
Muffler with closed motion - Silent Damping
Whether it is a hinge, a drawer or a folding door, any product that uses a silent damping system is far away from noise. The integrated damper fitting on the drawer slide enables the drawer to close silent even when it is heavy and heavy. Used on the door panel, it can be divided into three integration methods: snap-in, screw-in, and flush. The snap-in type is the most convenient and the user can install it at home. Whether the door is left open or right open, the damper fitting can be easily snapped onto the hinge of the door without tools. At the same time, the silent device on the upper and lower rails of the pull basket is integrated so that the pull basket stays at the last moment of closing and then silently closes.
Wardrobe Brand Wooden Door Brand Room Switch Room Cabinet Cupboard Door Cabinet Door Cabinet Cupboard Door Kitchen Door Kitchen Folding Door Cabinet Chest
The blade of a cutter knife is very sharp, and there are several parallel scribe lines on its blade. Because it is usually used to cut wallpaper, it is also called a "wallpaper cutter". Cutter knife is usually used in the decoration and advertising plaque industry. The biggest feature of the cutter knife is that it can be easy to replace the segmented blades. You can fold off the unsharp section of blade when using it, so the sharpness can be maintained without sharpening the blade frequently.
Cutter knife,Utility knife,plotter knife
Behappy Crafts (suzhou)Co.,Ltd , https://www.haoyuebehappy.com