Using a program to solve the problem of tight threaded holes

Our company is a manufacturer specializing in the production of gasoline engines. In the machining process, this phenomenon is often encountered: after the threaded holes of the parts are processed on the machining center, the thread gauges are used to check that the through ends are tight at the orifices. Acceptable. The reason is that the tap is worn after a period of use, causing burrs to form at the orifice during processing. In order to meet the process requirements, new taps must be replaced or burrs added.

Alcohol Mass Flow Meter

Zhejiang Sealand Technology Co., Ltd. is a trustworthy manufacturer of Alcohol Mass Flow Meter, Alcohol Mass Flowmeter, Alcohol Coriolis Meter, Mass Flow Meter Alcohol, Coriolis Mass Meter Alcohol, ATEX, IECEx & CE approved.

Sealand meter is designed and produced according to world`s latest Coriolis technology with better appearance, stability and accuracy to measure mass flow rate of a fluid traveling through a tube, widely applied to alternative energy, oil & gas, chemical, food & beverage, industrial energy, marine, power, pulp & paper, water & wastewater industries, etc.

Mass flow meter measures the mass based on Coriolis effort. The operating principle involves inducing a vibration of the tube through which the fluid passes. The vibration, though not completely circular, provides the rotating reference frame that gives rise to the Coriolis effect. While specific methods vary according to the design of the flow meter, sensors monitor and analyze changes in frequency, phase shift & amplitude of the vibrating flow tubes. The changes observed represent the mass flow rate and density of the fluid.

Alcohol Mass Flow Meter, Alcohol Mass Flowmeter, Alcohol Coriolis Meter, Mass Flow Meter Alcohol, Coriolis Mass Meter Alcohol

Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeter.com