The wear-resistant layer is the most transparent layer of the surface, the raw material of the red sapphire body, the scientific name aluminum oxide (AL2O3). The decorative layer, that is, the realistic and realistic wood grain layer of the floor surface seen by the naked eye. The substrate layer, also known as the middle layer, is crushed by natural or man-made fast-growing wood and is reconstructed by high-temperature and high-pressure fiber structure. High-density board, medium density board, particleboard. The moisture barrier is the back surface of the floor. The use of polymer resin material, glued to the bottom of the substrate, play a role in stability and moisture.
The selection of laminated wood flooring is mainly to see bumps, environmental protection indices and designs. The tightness of the concave and convex grooves determines the wear resistance and service life of the laminate flooring.
The use of wear-resistant rpms for laminate wood flooring is sufficient above 6,000 rpm. The minimum standard laminate wood floors on the market have already reached this standard, and the floor quality problems often appear in the gaps. Because the concave and convex groove is wide and loose, the floor debonds after a period of time. After the crevice enters the water, moisture and dust, the floor will start to warp, which will affect the use effect and the service life.
The environmental protection index refers to the enhancement of formaldehyde emission from composite wood floors. Formaldehyde is an indispensable material for bonding in the floor production process, and it is also the most important pollutant. If the flooring is of poor quality and the joints are not tight enough, more formaldehyde will be released, which will affect human health. The current domestic standard for formaldehyde release is 30 milligrams per 100 grams, and the international standard is 8 milligrams per 100 grams.
Nature floor del flooring formaldehyde decoration
Previous Decoration pollution detection wood flooring wood luxury high quality
Next The Strengths and Weaknesses of Solid Wood Strengthened Composite Flooring and Floor Tiles
Due to the special nature of geothermal heating, the requirements for the floor are very strict, and the floor for the geothermal heat must have good heat conduction performance, better thermal stability, better {TodayHot} environmental protection performance, and better “four good†resistance to deformation. It is recommended to choose laminate flooring. Because the thickness of the composite floor is mostly 7 ~ 8mm, it is easy to transfer the heat generated by the geothermal system to the surface, and the surface of the composite floor is a wear-resistant layer of metal oxides, the heat in the surface ...
Laminate flooring has a warm and natural decorative effect, and is especially popular for people who do not suffer from cracking deformation, easy installation, simple maintenance, and moderate price. How can I buy a reliable, reassuring floor? Look at the material: The density of the substrate should be a high-density fiberboard with a density of more than 0.86 g/cm3. The balance layer on the back of the board should be smooth and smooth without significant color differences. Look at the thickness: the international standard thickness is 8mm, below this thickness is not strong, ...
539) {this.resized=true; this.width=539;} border=0> Laminate flooring has a warm and natural decorative effect, and is especially popular for its advantages such as no cracking deformation, easy installation, simple maintenance, and moderate price. . How can I buy a reliable, reassuring floor? Look at the material: the density of the substrate should be more than 0.86 g/cm3 high density...
Laminate flooring is a wood-derived material. Its structure resembles a sandwich and is divided into four layers: a wear layer, a decorative layer, a substrate layer, and a moisture barrier layer. The wear-resistant layer is the most transparent layer of the surface, the raw material of the red sapphire body, the scientific name aluminum oxide (AL2O3). The decorative layer, that is, the realistic and realistic wood grain layer of the floor surface seen by the naked eye. The substrate layer, also known as the middle layer, is crushed by natural or man-made fast-growing wood and is reconstructed by high-temperature and high-pressure fiber structure. High density...
Laminate flooring in the purchase, due to the manufacturer on the material (referring to raw materials) process (refers to the advanced level of production equipment), the impact on product quality is very large. Strengthen the floor has unparalleled advantages of solid wood flooring: If it is not easily deformed, wear-resistant, durable strong resistance, easy installation, flame-retardant, easy care, good maintenance, etc., to meet the fast pace of modern people, longing for easy, simple lifestyle. According to statistics of national authorities, the market share of laminate flooring has been...
submit
Digital Microscope,Camera Video Microscope,Sdm Digital Microscope,Video Screen Microscope
Ningbo Huaguang Precision Instrument Co., Ltd. , https://www.hgopt.com