Frequently asked questions about living room furniture are cracking or shrinking. This is because the furniture material is hard and dense, and it takes a long time to completely eliminate the internal stress of the board. Secondly, the solid wood furniture produced in the south is slightly higher in moisture content due to environmental factors. It is normal for dry shrinkage cracking to occur locally after several months of use in dry weather conditions in the north. After the manufacturer's free warranty, this phenomenon can be eliminated in about a year.
1. The position of the furniture placed indoors should be away from the strong air circulation parts such as the doorway, window and tuyere, and should not be exposed to direct sunlight;
2, as far as possible in winter, not placed near the heating, so as not to overheat the temperature caused by local shrinkage cracking;
3, to maintain indoor air humidity, the indoor temperature is maintained at about 25 degrees, the humidity is maintained between 70-80%, the summer rainy season is coming to open air conditioning and dehumidification often, in order to reduce the moisture absorption and expansion of the wood, to avoid the swelling and deformation of the structure Slotting
4, to keep the furniture tidy, daily use a dry soft cotton cloth to wipe the dust. It is not advisable to use a chemical brightener to avoid damage to the paint film. In order to maintain the brightness of the furniture paint film, the walnut can be crushed and peeled, and then covered with three layers of gauze to make an oil wipe. After the surface is oiled, the gauze is used for oil polishing.
5, the panel of the table furniture, in order to protect the paint film from being scratched, but also to display the wood texture, generally placed on the table top thick glass plate, and separated between the glass plate and the wooden table with a small suction pad. It is not recommended to use transparent polyethylene crystal plates;
6. If you move your furniture, you should lift the furniture and do not drag it to avoid loosening the overall structure of the furniture.
1. Compact square form-factor outdoor high-power floodlight and Wall Washer for architectural and landscape lightings.
2. Cree or Lumileds LEDs in wide ranges of whites, tunable whites, mono colour,RGB, RGB+W and wide to narrow (3°) beam angles.
3. High brightness contrast level for smooth and consistent color change effect.
4. Extruded aluminum alloy body with high efficient heat dissipation fins, protective vent and clear glass diffuser.
5. Easy and flexible installation with adjustable 60° tit and rotatable mounting base.
6. AC110~220V or DC24V input voltage, Integrated AC power driver. DMX control with auto addressing function.
7. Rated IP 66
Flood Light,LED Flood Light,Architecture Flood Light,High Power Flood Light,Addressable Flood Light,Anti-clare LED Flood Lights,Narrow Beam Angle Flood Light
StrongLED Lighting Systems (Suzhou) Co., Ltd. , https://www.strongledcn.com