With the improvement of living standards, solid wood furniture has become the "darling" of more and more families. However, many consumers only know the environmental advantages of solid wood furniture, but they do not know much about the maintenance knowledge of solid wood furniture. If the expensive solid wood furniture is moved home and used improperly, the heartache can't be too late. Solid wood furniture is like the lips of a person. In the hot summer and dry winter, it is easy to crack the skin. The reason is that it is caused by water shortage.
The scapegoat for the cracking quality of furniture into "dry and water shortage"
Wood furniture is subject to deformation and cracking due to the influence of different climates. Furniture cracking can be roughly divided into two situations: one is that the splitting crack becomes larger, and the other is that the furniture surface is cracked. The biggest cause of cracking of solid wood furniture is humidity, not temperature. In the hot summer, air conditioning in the room can easily cause the air to be too dry. In this regard, it is necessary to open the window ventilation and ventilation, which is not only good for the physical and mental health of the owner, but also helpful for the maintenance of solid wood furniture. Solid wood furniture, like human skin, loses moisture when it is extremely dry and shrinks automatically, causing a few cracks on the surface. However, as long as it is solid wood material, moisture deformation and cracking will inevitably occur. However, as long as the moisture content of the board is controlled and the manufacturing process is improved, the probability of cracking can be greatly reduced. In general, the moisture content in wood is below 10% and is more suitable for the weather in the north.
Wipe the hydrating with a wet rag
Usually clean, it is recommended to use a slightly damp rag to wipe, but not too wet, so that it can not only make the water effect, but also does not make the furniture damp. Install a waterproof pad under the furniture legs that are easy to absorb water, and keep a good ventilation distance near the walls of the outer wall and the bathroom. For furniture with colored paint, avoid direct sunlight. It can not be scrubbed with solvents such as acid, alkaline or gasoline, which makes it easy to disfigure solid wood flooring.
Time to make a solid wax "mask"
Solid wood furniture Although the products of many solid wood furniture manufacturers are manufactured after strict drying procedures, the protection and maintenance of solid wood furniture cannot be taken lightly. Solid wood flooring prefers an environment with a temperature below 28 ° C and a humidity between 50% and 70%. The protection and maintenance factor of solid wood furniture is to maintain the gloss. On weekdays, the protective wax or special cleaning agent can be evenly applied to the surface of the furniture, and then gently wiped to maintain the gloss and moisture.
Conditions allow solid wood furniture to be maintained in four seasons
If time and other conditions permit, in fact, solid wood furniture should be maintained according to the climate change of the four seasons. Under normal circumstances, waxing should be done once a quarter, so that the solid wood furniture looks shiny, and the surface does not vacuum, it is easier to clean. Only by paying attention to daily cleaning and maintenance can we make solid wood furniture last forever. The four season maintenance methods are described below.
Spring: Spring is windy, and there are various pollen grains, willow mites, dust, dust mites, fungi, etc. floating in the air. These dirty things will be absorbed in every corner of the furniture. Avoid cleaning with a damp cloth or a dry rag when cleaning. Otherwise, it will cause the surface of the furniture to be worn, and should not be cleaned with organic solvents. It should be wiped with a dry cotton rag. For dirty dirt on the surface of the furniture, it can be washed with mild soapy water and then waxed after drying. Just one time. In addition, the temperature is changeable, the spring rain is heavy, and the climate is relatively humid. This season, the maintenance of wooden furniture should pay special attention to keep the room ventilated. If the ground is wet, the furniture legs should be properly raised, otherwise the legs will be easily corroded by moisture.
Summer: It is rainy in summer. Pay attention to the frequent ventilation of the windows. The position of the furniture should be properly adjusted to avoid direct sunlight and cover with curtains if necessary. Due to the hot summer climate, people use air conditioners at a high frequency. They must use air conditioners to protect furniture. Frequently opening the air conditioner can drain the moisture, reduce the moisture absorption and expansion of the wood, avoid the wet deformation of the concrete structure and open the seam. However, the temperature must be kept at (15 ~ 25) °C when the air conditioner is turned on, and the furniture should be kept away from the air conditioning tuyere to avoid Huge temperature differences cause furniture damage or premature aging.
Autumn: Autumn air humidity is relatively small, indoor air is relatively dry, and wooden furniture is easier to maintain. Although the autumn sun is not as strong as the summer, the long-term sun exposure and the already dry climate, the wood is too dry, prone to cracks and partial fading, so avoid direct sunlight. When the climate is dry, keep the solid wood furniture moist. Professional furniture care oils that are easily absorbed by wood fiber should be used. For example, orange oil can not only lock the moisture in the wood to prevent the dry cracking of the wood, but also nourish the wood, and reproduce the brilliance of the wooden furniture from the inside to the outside.
Winter: The winter climate is very dry. It can be said that the most taboo season of solid wood furniture should be spent on maintenance. The climate is dry, and the window opening time should be shortened as much as possible. It is better to use a humidifier to adjust the indoor air humidity. In winter, a lot of dry dust is used to maintain the dust and dirt on the surface of the furniture. It is worth reminding here that friends who often use heating should pay attention not to place the furniture near the heating, and avoid the indoor temperature is too high.
DBB Plug Valve called double block-and-bleed plug valves which is high-integrity, positive shut-off valves. DBB plug valve have advantages of easy maintenanceand repair. The valve size is from 2" to 24" with matching valve pressure from class 150 to class 900. DBB plug valve normally used in oil tank in airport with double sealing to protect oil pipeline from any risks, such as fire or leakage etc.
Dbb Plug Valve,Double Block Double Bleed Plug Valve,General Plug Valve,Api General Plug Valve
Yongjia South Trading Co.,Ltd , https://www.n-lvalve.com