Electronic patrol inspection system is divided into online and offline two categories.
First, the online electronic patrol system: In a certain range of integrated wiring, the patrol inspection device is set on a certain patrol inspection point, patrol inspection personnel only need to carry information button or information card, According to the scope of the patrol, the supervisor only needs to be in the central monitoring room to see the patrol route of the patrolling staff and the time of the patrol inspection point. Its disadvantages are large amount of construction and high cost, and the outdoor installation of transmission lines is subject to human damage. It is even more difficult to reconfigure an online patrol system for a renovated building. Also susceptible to temperature, humidity wiring range, installation and maintenance is also more troublesome, the advantage is real-time management.
Second, off-line electronic patrol inspection system: As the name suggests this system does not require wiring, as long as the patrol inspection point installed in the patrol position, patrol personnel holding the patrol inspection device to each patrol inspection point to collect information, will The information is transmitted to the computer through the transmitter and the whole patrol inspection process can be displayed (if it needs to be printed by the printer, a complete patrol inspection inspection will be formed). Compared with the online electronic patrol inspection system, the disadvantage of offline electronic patrol inspection system is that it cannot be managed in real time. If there is a walkie-talkie, this shortcoming can be avoided. Its advantages are no wiring, simple installation, easy to carry, easy operation and reliable performance. Not affected by temperature, humidity, and range, system expansion, line change is easy and the price is low, and should not be destroyed. The system is easy to install and maintain and is suitable for any patrol or duty inspection field.
Offline electronic patrol inspection system classification and system configuration:
(I) The offline electronic patrol inspection system is divided into two types: the contact patrol inspection system and the non-contact patrol inspection system (also called the inductive patrol inspection system).
1. Contact patrol inspection system: refers to the patrol inspection personnel holding the patrol inspection device to the designated patrol inspection point contact information button, the information button on the recorded position, patrol inspection contact time Information such as the name of the patrolling inspector is automatically recorded as a piece of data, with sound and light prompts at work, and its power consumption is also very small.
Contact patrol inspection device is divided into two types: non-display patrol inspection device and digital display patrol inspection device. Their work content is the same. The difference is that when the digital display patrol inspection device reads the information, the patrol inspection personnel can accurately and timely see the patrol time through the display window on the patrol inspection device. frequency. There is a digital display function, which is an upgraded version of the contact patrol inspection device, which laid a fortune for the development of the future induction patrol inspection device. The product of this model is only produced by professional patrol inspection manufacturers, adding a historical record to the development of patrol inspections, which has played a role in the past.
2. Non-contact patrol inspection system (also called inductive patrol inspection system): patrol inspection device is the use of proximity card technology to read information within a certain range without touching the information point, it comes with a display , You can view the information of the current deposit, at the same time, there are personnel records, event records, and the function of the stick number itself. Its disadvantage is that it is vulnerable to strong electromagnetic interference. Does not adapt to continuous work in harsh environments, if used under harsh conditions, but also want to have the screen read the information, optional digital patrol inspection device, which makes up for non-display contact patrol inspection device and non-contact Patrol inspection deficiencies.
(II) System configuration A complete set of electronic patrol inspection system consists of three parts: the patrol inspection system, software system, and information button system.
1. The system software is the blood of the entire patrol inspection system. The entire patrol inspection process is through the software to query the entire process of recording, operation and inspection patrols, so a complete system management software provides the user with personnel settings. That is to provide the user with the identity of the operator; the location setting, that is, the patrol plan provided for different patrol locations; the plan set up to provide the location of the personnel for the entire patrol area. It can easily query the recent records and backup records by calculation. Patrol location. Guards, time, events, and other different options; whether or not the number of patrol officers can be added or subtracted during the patrol based on specific conditions; there is no limit to the number of patrolling points; there are also password settings that make it easy for managers to operate. , From the more effective assessment of the patrol patrol staff working conditions, for different products, there are different software configurations, software configuration is generally fool-type, easy to install, easy to operate, there are statistical analysis, printing, backup and other functions is convenient Management staff management. With the expansion of the application of the patrol inspection system, software is also changing to adapt to different customer groups.
2. Information button: The contact patrol inspection device adopts the United States (Dallasibntton) information button, which is called the domestic TM card. Its number is the only one in the world. It is contact-type operation, and it is not afraid of interference. It is 100% error-free. Can be mounted on key rings or other accessories. It is very convenient to carry and maintain. It is generally suitable in harsh environments. Inductive patrol inspection devices use inductive technology to read information. In some difficult and special occasions, there are certain drawbacks. However, with the development of science and technology, this difficulty will soon The future can be solved.
Applications Electronic Patrol inspection system and a <br> <br> several solutions, on-line electronic patrol system more suitable for inspection within a certain range particularly demanding, or inspection work has some risk of Places, as currently stated, use very little.
Second, off-line electronic patrol inspection system: (1) contact patrol inspection device is a full metal shell, durable, waterproof, shockproof, protect internal electronic equipment from shock and accidental damage at work, there is no The reciprocating parts are particularly suitable for practical work needs, such as the opening of postal boxes, patrol inspection of intelligent buildings, hotels, and borders, inspection of pipelines for oil pipelines, gas pipelines, gas management, collection of large factory tools, power plant equipment, and industrial instrumentation systems. The timing check, etc., can be easily adopted in any place involving frequency and time limit management. (2) The non-contact patrol inspection device currently has two kinds of high-strength engineering plastics and metal shells. Since they are susceptible to strong electromagnetic waves and have some evasion in some harsh environment pipeline engineering, we can choose According to the actual situation. In general, contactless non-display or non-contact (inductive type) can be applied. If you want to use both the screen display and the harsh environment, select the contact type digital display.
Compared with the online electronic patrol system, the offline electronic patrol inspection system is more widely and practically applied. It is worth noting that we should pay more attention to various explosive areas such as oil, gas, and gas, and select products that have passed inspection or certification in the national security and explosion protection department. In order to cause unnecessary confusion or trouble.
Third, several solutions for electronic patrol inspection system
1. Typical application of stand-alone management solutions: opening of postal boxes, frequency/time management of dry oil shipments.
Enterprise equipment maintenance and production process monitoring and management. Hotels, hotels, supermarkets, prisons to prevent accidents.
2. Typical applications of hybrid network solutions: Oilfield pipelines, pump station and equipment inspections, *guard patrol point line maintenance, etc.
3. Typical application of telecommunication network solutions: fire safety department to enterprise safety management, public transport department car arrival attendance management, long distance telephone transmission optical fiber cable inspection, railway maintenance, electric service inspection, insurance company supervision of property insurance companies, security inspection, real estate company Community security inspection supervision.
4. Typical application of computer network program: Food Agency set fire to grain storage, anti-theft patrol supervision, head office appraisal of all subordinate companies, * post inspection.
First, the online electronic patrol system: In a certain range of integrated wiring, the patrol inspection device is set on a certain patrol inspection point, patrol inspection personnel only need to carry information button or information card, According to the scope of the patrol, the supervisor only needs to be in the central monitoring room to see the patrol route of the patrolling staff and the time of the patrol inspection point. Its disadvantages are large amount of construction and high cost, and the outdoor installation of transmission lines is subject to human damage. It is even more difficult to reconfigure an online patrol system for a renovated building. Also susceptible to temperature, humidity wiring range, installation and maintenance is also more troublesome, the advantage is real-time management.
Second, off-line electronic patrol inspection system: As the name suggests this system does not require wiring, as long as the patrol inspection point installed in the patrol position, patrol personnel holding the patrol inspection device to each patrol inspection point to collect information, will The information is transmitted to the computer through the transmitter and the whole patrol inspection process can be displayed (if it needs to be printed by the printer, a complete patrol inspection inspection will be formed). Compared with the online electronic patrol inspection system, the disadvantage of offline electronic patrol inspection system is that it cannot be managed in real time. If there is a walkie-talkie, this shortcoming can be avoided. Its advantages are no wiring, simple installation, easy to carry, easy operation and reliable performance. Not affected by temperature, humidity, and range, system expansion, line change is easy and the price is low, and should not be destroyed. The system is easy to install and maintain and is suitable for any patrol or duty inspection field.
Offline electronic patrol inspection system classification and system configuration:
(I) The offline electronic patrol inspection system is divided into two types: the contact patrol inspection system and the non-contact patrol inspection system (also called the inductive patrol inspection system).
1. Contact patrol inspection system: refers to the patrol inspection personnel holding the patrol inspection device to the designated patrol inspection point contact information button, the information button on the recorded position, patrol inspection contact time Information such as the name of the patrolling inspector is automatically recorded as a piece of data, with sound and light prompts at work, and its power consumption is also very small.
Contact patrol inspection device is divided into two types: non-display patrol inspection device and digital display patrol inspection device. Their work content is the same. The difference is that when the digital display patrol inspection device reads the information, the patrol inspection personnel can accurately and timely see the patrol time through the display window on the patrol inspection device. frequency. There is a digital display function, which is an upgraded version of the contact patrol inspection device, which laid a fortune for the development of the future induction patrol inspection device. The product of this model is only produced by professional patrol inspection manufacturers, adding a historical record to the development of patrol inspections, which has played a role in the past.
2. Non-contact patrol inspection system (also called inductive patrol inspection system): patrol inspection device is the use of proximity card technology to read information within a certain range without touching the information point, it comes with a display , You can view the information of the current deposit, at the same time, there are personnel records, event records, and the function of the stick number itself. Its disadvantage is that it is vulnerable to strong electromagnetic interference. Does not adapt to continuous work in harsh environments, if used under harsh conditions, but also want to have the screen read the information, optional digital patrol inspection device, which makes up for non-display contact patrol inspection device and non-contact Patrol inspection deficiencies.
(II) System configuration A complete set of electronic patrol inspection system consists of three parts: the patrol inspection system, software system, and information button system.
1. The system software is the blood of the entire patrol inspection system. The entire patrol inspection process is through the software to query the entire process of recording, operation and inspection patrols, so a complete system management software provides the user with personnel settings. That is to provide the user with the identity of the operator; the location setting, that is, the patrol plan provided for different patrol locations; the plan set up to provide the location of the personnel for the entire patrol area. It can easily query the recent records and backup records by calculation. Patrol location. Guards, time, events, and other different options; whether or not the number of patrol officers can be added or subtracted during the patrol based on specific conditions; there is no limit to the number of patrolling points; there are also password settings that make it easy for managers to operate. , From the more effective assessment of the patrol patrol staff working conditions, for different products, there are different software configurations, software configuration is generally fool-type, easy to install, easy to operate, there are statistical analysis, printing, backup and other functions is convenient Management staff management. With the expansion of the application of the patrol inspection system, software is also changing to adapt to different customer groups.
2. Information button: The contact patrol inspection device adopts the United States (Dallasibntton) information button, which is called the domestic TM card. Its number is the only one in the world. It is contact-type operation, and it is not afraid of interference. It is 100% error-free. Can be mounted on key rings or other accessories. It is very convenient to carry and maintain. It is generally suitable in harsh environments. Inductive patrol inspection devices use inductive technology to read information. In some difficult and special occasions, there are certain drawbacks. However, with the development of science and technology, this difficulty will soon The future can be solved.
Applications Electronic Patrol inspection system and a <br> <br> several solutions, on-line electronic patrol system more suitable for inspection within a certain range particularly demanding, or inspection work has some risk of Places, as currently stated, use very little.
Second, off-line electronic patrol inspection system: (1) contact patrol inspection device is a full metal shell, durable, waterproof, shockproof, protect internal electronic equipment from shock and accidental damage at work, there is no The reciprocating parts are particularly suitable for practical work needs, such as the opening of postal boxes, patrol inspection of intelligent buildings, hotels, and borders, inspection of pipelines for oil pipelines, gas pipelines, gas management, collection of large factory tools, power plant equipment, and industrial instrumentation systems. The timing check, etc., can be easily adopted in any place involving frequency and time limit management. (2) The non-contact patrol inspection device currently has two kinds of high-strength engineering plastics and metal shells. Since they are susceptible to strong electromagnetic waves and have some evasion in some harsh environment pipeline engineering, we can choose According to the actual situation. In general, contactless non-display or non-contact (inductive type) can be applied. If you want to use both the screen display and the harsh environment, select the contact type digital display.
Compared with the online electronic patrol system, the offline electronic patrol inspection system is more widely and practically applied. It is worth noting that we should pay more attention to various explosive areas such as oil, gas, and gas, and select products that have passed inspection or certification in the national security and explosion protection department. In order to cause unnecessary confusion or trouble.
Third, several solutions for electronic patrol inspection system
1. Typical application of stand-alone management solutions: opening of postal boxes, frequency/time management of dry oil shipments.
Enterprise equipment maintenance and production process monitoring and management. Hotels, hotels, supermarkets, prisons to prevent accidents.
2. Typical applications of hybrid network solutions: Oilfield pipelines, pump station and equipment inspections, *guard patrol point line maintenance, etc.
3. Typical application of telecommunication network solutions: fire safety department to enterprise safety management, public transport department car arrival attendance management, long distance telephone transmission optical fiber cable inspection, railway maintenance, electric service inspection, insurance company supervision of property insurance companies, security inspection, real estate company Community security inspection supervision.
4. Typical application of computer network program: Food Agency set fire to grain storage, anti-theft patrol supervision, head office appraisal of all subordinate companies, * post inspection.
The undermount sink is installed under the countertop, which has more space for use. The countertop is easy to clean and maintain. You can easily sweep the dirty water from the countertop into the sink with a rag, making it easier to clean the kitchen.Undermount sink Follow this video, you can easily install an undermount sink in just a few minutes. A must-have in the kitchen, a high-quality and easy-to-clean stainless steel sink can help you perform household chores efficiently.
Undermount Sink,Undermount Kitchen Sink,Undermount Stainless Steel Kitchen Sink,Copper Undermount Sink
JIANGMEN MEIAO KITCHEN AND BATH CO.,LTD , https://www.jmmeiaogroup.com