Iron, I use glue to stick

In the life, the role of glue plays a decisive role in the process of home decoration. Many people also ask what glue can stick to metal objects. It is also very important to choose the right glue. Here's to teach you to choose and use, and get rid of the use of glue. Troubles!

Bonding iron-based products must choose a very strong adhesive glue, such as strong plastic, adhesive, these glues are very suitable for bonding iron products. Strong glue and all-purpose adhesive are easy-to-handle, manual and mechanical sizing glues, generally room temperature curing, excellent electrical insulation properties, play a very good protective effect on bonded iron objects, and most importantly, Strong glue and all-purpose adhesive are high-strength glue with strong adhesive strength, which can effectively bind iron-type articles, make it iron products not easily fall off, and have elasticity after curing, which can protect the safety and reliability of articles.

Use of glue:

1. Remove dust, grease, rust, etc. from the surface with a dry cotton cloth or sandpaper, and then wipe with a cleaning agent such as ** or trichloroethylene to clean the surface.

2. Unscrew the glue on the front cover and use it. If there is glue on the bottle mouth, wipe the glue with cotton cloth first. Then use the needle or PE dropper to control the glue flow and ensure the bonding effect.

3, the glue on the surface is followed by a small drop of adhesive, immediately bonding, and remained until hardening, hardened for several seconds. The glue can reach practical strength in about 30 minutes, and the highest strength can be obtained after 24 hours.

4. After the glue is used, clean the bottle mouth and tighten the lid.

5. Store the glue in a cool, dry place after use.

Adhesive use matters needing attention:

1, the use of special instant glue for metal Do not wear knit gloves to use, the glue is absorbed by the knitted material of the gloves will quickly occur polymerization reaction, the reaction generates high heat, will burn hands.

2. The smell of glue is irritating, and the workplace should be ventilated when used in large quantities.

3, when the glue has a lot of leakage, it can be cured by water and then scraped off.