Home>Bearing knowledge>Key analysis of force application when loading and unloading imported bearing

/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Key Analysis of Force Application When Installing and Removing Bearings

Source: Bearing network time: 2014-10-26

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

.1) The combined force of the force can pass through the axis of the bearing; this requires that the point of application is uniformly symmetrical and stable; the force is applied through the spherical surface or parallel to the axis.
.2) The size of the force should be smooth and uniform; it should not be impacted; this requires the use of oil pressure or something that can apply a smooth tension or pressure; the real has to use hammering; also through the copper sleeve and other soft Do not use the metal to cushion; the tapping force can be light. The best use of copper rods or copper hammers for hammering.
.3) Prevent the force from being applied through the tumbling body; this requires the force applied through the inner ring when the inner ring (shaft ring) is assembled and disassembled; when the outer ring is assembled and detached, the force is applied through the outer ring.
.4) The drag force should be continued to the extent it should be; for example, when the bearing is mounted, the force should be stopped when the bearing is just in the correct orientation; ensure that the end face of the ferrule (gasket) abuts against the shoulder hole or the shoulder end face of the shaft; Can't be squeezed too tightly;

Recommend to friends comments close window

Bearing related knowledge

Expanding the utilization rate of koyo bearings and the replacement skill of smoothing agents: the smooth principle of split sliding bearings
SKF imported bearings for hot rolling bearing equipment and sub-components commonly used terms and definitions (on)
Talking about "TIMKEN Bearings Ways to Reduce Noise"

This article links to http://
Please indicate China Bearing Network http://

Previous:The focus of the selection of sliding bearing grease Next:Relief and disposal of elastic strut thrust bearing

Metal Polishing Wax Paste Compounds

Metal Polishing Wax Paste Compound ,Yellow Buffing Wax,Solid Wax For Mirror Polishing,White Car Wax

NINGBO HENGHUA METAL SURFACE TREATMENT TECHNOLOGY CO.,LTD. , https://www.henghuametal.com