Maintenance gate tips

Various types of pedestrian walkway gates (three-roll gates, wing gates, swing gates, full-height gates, and speed-through gates) integrate machinery, electronics, microprocessor control, and various reading and writing technologies. More and more popular, everyone can often see various types of pedestrian walkway gates (tribral gates, wing gates, swing gates, full heights) at sites, factories, communities, fitness clubs, subways, stations, scenic spots, stadiums, and other places. Turnstiles, speed gates, such as Beijing Ximo Luo three roller gates, Beijing West Moruo wing gates, West Moreau swing gates. Then how do the pedestrian walkway gates (three-roll gates, wing gates, swing gates, full-height gates, speed gates) maintain and maintain? Let Ximoruo, Beijing's engineers guide everyone in this area.

First of all, we need to know that the maintenance of pedestrian gates (three-roll gates, wing gates, swing gates, full-height gates, and speed-through gates) is of vital importance. Like automobiles, maintenance and maintenance are needed. The pedestrian gates (three roller gates) The maintenance and service of wing gates, swing gates, swing gates, full-height gates, and speed-through gates directly affect the service life of the gates, so they are used for pedestrian gates (three roller gates, wing gates, swing gates, full height gates, speeds). Through the regular maintenance, not only must be done, but also do a good job according to the requirements, many users rarely maintain or even no maintenance, etc. only when the machine is broken, they think of the manufacturers before they go to replace parts. This is often due to small losses, usually there is no maintenance, a little bit of a problem, a long time will affect the use, so we must understand the importance of maintenance of the gate. Maintenance begins with the following aspects.

First, the external cleaning and maintenance of the general pedestrian walkway gate (three roll gate, wing gate, swing gate, full height switch, speed pass gate, sliding gate) are made of domestic 304 stainless steel, it is recommended that once a week external cleaning.

1. Clean the surface of pedestrian gates (three-roll gates, wing gates, swing gates, full-height gates, speed gates, and slide gates): Clean the surface with a soft cloth and polish the outside of the chassis with a soft cloth and talcum powder. , Conditional can be coated with anti-rust oil, just coated with anti-rust oil do not rub it by hand, etc. 3-5 hours natural drying can hand contact, otherwise it will destroy the surface rust effect.

2. Removal of rust spots from pedestrian gates (three roller gates, wing gates, swing gates, full height gates, speed gates, panning gates): It may take a long time to use, especially when used outdoors. Some rust spots may appear. , remove rust spots can use sandpaper and talcum powder to rub along the long lines (protect thick grain direction), otherwise it will affect the appearance.

3, if it is the appearance of spraying or painting chassis, use a soft cloth to wipe off the dust on the outside, if exposed scratches, use the same color paint to make up, but be careful not to wing, swing gate, speed through the door of the infrared pair The part of the shot was painted, or the brake was accidentally alarmed, causing unnecessary trouble.

Second, the movement of maintenance: movement is the heart of the machine, we must maintain a good, it is recommended once a month maintenance.

1. Cut off the power and open the cover of the pedestrian walkway gates (three-roll gates, wing gates, swing gates, full-height turnstiles, speed-through gates, translating gates), clean the surface dust, clean the transmission parts and add butter, and wings. Gates, swing gates, speed gates, pan gears and wheel slots should also be properly greased.

2. Check the fasteners and connecting rods for loosening and tighten them.

3. Check the wear of the wearing parts. The positioning arm of the tripod gate and the positioning plate have more than 3mm gaps and replace them in time. The normal clearance (1-1.5mm) is properly added in the solenoid valve core to make the solenoid valve Reducing resistance during left and right movements, and being lubricated, be careful not to add too much and be moderate.

4. Pay attention to the limit switch and limit stop of the three-roll gates. Do not adjust them in a timely manner to prevent mistakes caused by adjusting too far or too close.

Third, the pedestrian gates (three roller gates, wing gates, swing gates, full height switch, speed pass gates, translation gates) circuit power maintenance

1, cut off the power, clean the surface of dust. Be careful not to wash with water and prevent short circuits from occurring.

2, according to the previous use, to see if there is a problem in the circuit part, there is no problem, then check the circuit, power supply, wires, plug-ins are exposed or loose, to be bandaged, organize, tighten the plug, check for leakage, if the wire has Aging should be replaced.

3, refer to the gate manual, check whether the various parameters are normal, there are no aging electronic components. There are problems, we must contact the manufacturers, follow the steps, find the root cause of the problem, replace individual electronic components.

Fourth, the above maintenance must have someone special maintenance, especially the maintenance of the movement and the circuit part, to go through Beijing Ximo Luo engineers professional training, full understanding of the strengths and weaknesses in order to be on duty operations.

Maintenance brake tips provided by Beijing Xiemo, if necessary, telephone consultation