Rotary brakes, also known as cross turnstiles, are the latest upgrades for three-roll gates, swing gates, wing gates, and translation gates. It is mainly used to prevent violent impact on the access control occasions, such as football fields and prisons. Compared with other gates, the main features of the rotary brakes are: knots, resistance to shocks, and the inability to illegally exceed them. The following are the seven main features of the rotary brake:
1. Security: The biggest concern with rotating turnstiles is that the audience is locked in the gate and cannot enter or exit. In any case (such as suddenly lost power) must avoid the occurrence of this situation, depending on the principle of design.
2, strong impact resistance: the turn bar and the outer guardrail, etc. need to be strong, able to withstand large destructive power.
3, arm weight, inertia, when the arm is in place, there should be no oscillation phenomenon.
4. Rotational life: There will be wear on the moving parts and the design of the hub components will be well-chosen.
5, ticket inspection speed: gate traffic flow, check ticket speed is an important indicator. The ticket checking speed depends on the gate control mode, communication networking mode, ticket checking processing software, and mechanical action speed. In general, the gate response speed is within 500ms.
6, the bar code reader above the glass material: above the bar code reader must be transparent, the use of organic glass low cost, easy processing and installation, but after many brush votes, the glass will wear rough, affect the bar code reading speed and accuracy Therefore, wear-resistant quartz glass must be used.
7. Reliability: The reliability of the gate is based on the reliability and integration of the various components of the gate. The selection of good quality components is the basis, such as card readers, controllers, monitors, etc.; the integration method mainly depends on the design selection and communication method of the control unit. The presence or absence of lightning protection components also affects the reliability of the equipment.
1. Security: The biggest concern with rotating turnstiles is that the audience is locked in the gate and cannot enter or exit. In any case (such as suddenly lost power) must avoid the occurrence of this situation, depending on the principle of design.
2, strong impact resistance: the turn bar and the outer guardrail, etc. need to be strong, able to withstand large destructive power.
3, arm weight, inertia, when the arm is in place, there should be no oscillation phenomenon.
4. Rotational life: There will be wear on the moving parts and the design of the hub components will be well-chosen.
5, ticket inspection speed: gate traffic flow, check ticket speed is an important indicator. The ticket checking speed depends on the gate control mode, communication networking mode, ticket checking processing software, and mechanical action speed. In general, the gate response speed is within 500ms.
6, the bar code reader above the glass material: above the bar code reader must be transparent, the use of organic glass low cost, easy processing and installation, but after many brush votes, the glass will wear rough, affect the bar code reading speed and accuracy Therefore, wear-resistant quartz glass must be used.
7. Reliability: The reliability of the gate is based on the reliability and integration of the various components of the gate. The selection of good quality components is the basis, such as card readers, controllers, monitors, etc.; the integration method mainly depends on the design selection and communication method of the control unit. The presence or absence of lightning protection components also affects the reliability of the equipment.
Aluminum Precision Machining Components
Aluminum Precision Machining Components,Aluminum Precision Machining Parts,Precision Machining Parts,Cnc Precision Machining Parts
Stand Dragon Industrial Co., Ltd. , https://www.standdragontw.com