According to survey data, consumers in the city’s choice of flooring materials account for 81% of wooden flooring, while laminate flooring and engineered wood flooring are more preferred, accounting for 31% of the total. At present, the floor is divided into four types of flooring: solid wood, solid wood composite, reinforced composite and bamboo, while wood and composite have different classifications. When consumers enter the building materials store, they will be plagued by hundreds of different types of floors. Salespeople will also make every effort to educate them. From quality, price to service, and endless publicity, most consumers will find it hard to understand. . Therefore, it is necessary to distinguish the types of floors, regardless of the popularity, and to select the products that are suitable for them.
Henkel's Best Delights Yijia Store    Fanmuju Solid Wood Furniture
First, the high price of solid wood flooring
Solid wood flooring is roughly divided into hardwood flooring and cork flooring. Among them, hardwood floors have a hard texture, delicate texture, good abrasion resistance, elasticity, dryness, cleanliness, and beauty. The woods used are ash, birch, walnut, oak, jellyfish, beech, etc. Some of the wood floors used in the wood are cherry, longan, citron, etc., while the cork flooring is mainly pine, fir, cassia, hemlock, etc.? Snow, cypress wood, warm and elastic. However, the wear resistance is poor. If it is not dried enough, it will be more easily deformed and cracked.
In general, although the solid wood flooring has the advantages of good foot feeling, natural texture, color, and good heat preservation, the hardness is slightly inferior.
Second, the price difference of solid wood flooring
Solid wood composite floor is divided into the following three types: three-layer solid wood composite flooring made of three different types of wood. The top layer is made of hard wood such as beech, birch, beech, cherry, and ash, and the middle and bottom layers are used. Soft wood, such as the use of pine as the center of the core board, the flexibility of solid wood flooring, and relatively reduced the cost.
Multi-layer solid wood composite floor, with multi-layer plywood as the substrate, the surface layer of hardwood veneer, laminated by urea-formaldehyde resin.
New solid wood composite flooring, the use of hard wood surface is basically the same as the first, the middle layer and the bottom layer of the use of medium density fiberboard or high density fiberboard, the effect and durability are similar to the three-tier solid wood flooring.
This kind of floor has a degree of abrasion resistance between that of a laminate floor and a solid wood floor, and the hardness is lower than that of a hardwood floor and a solid wood floor.
Third, strengthen the floor price is the most affordable
The laminate flooring is composed of three layers of materials. The middle layer is a density fiberboard. It has strong impact resistance and is not easily deformed. The bottom layer is a balance layer and plays a damp-proof role. The surface layer is covered with a melamine wear layer on the decorative layer of the printing. The abrasion resistance is far. Higher than wood, good flame retardant, and anti-corrosion, moisture-proof, anti-mite.
Compared with the above two floor types, the surface of the laminate flooring can print a variety of woodgrains and is beautiful. Paving is quick and easy, saving wood. But the flexibility is worse than solid wood flooring. The biggest advantage is that the price is the cheapest.
Fourth, bamboo flooring higher cost
Bamboo flooring is a floor made of bamboo after processing. It is rich in the natural beauty of natural materials and has the advantages of wear resistance. It can also prevent squatting and resist earthquakes. Bamboo flooring is cool in winter and cool in summer, moisture-proof and wear-resistant, and easy to use. It can reduce the use of wood and protect the environment.
Fifth, the rational paving use more peace of mind
At present, there are bottlenecks in floor innovation and the homogenization of products is becoming more and more serious today. Consumers should put more effort into the paving stage of flooring.
There has always been a saying in the flooring industry that wood floors are "seven-packs of three-part floorboards," which means that the quality of the installation determines 70% of the floor quality. The unsatisfactory use of the floor and, to a great extent, caused by the unsatisfactory floor covering, has caused the floor to become the biggest problem that restricts floor use.
To circumvent unpleasant floor repairs, it is more important to do well in sales. The first website reminded them that before the installation, the staff must carry out four different aspects of the measurement preparation work. The advantage of this is that it can greatly enhance the accuracy and precision for the post-construction process and effectively detect the ground The specific degree of the five major issues such as tide, concave, convex, and split.
In addition, the staff must also carefully examine the three aspects of ground flatness, ground firmness, and non-wet ground.
Consumer Tips: Picking the floor to master the seven principles
Since wear resistance is not the most important indicator for buying floors, how should consumers choose wood flooring? There are seven suggestions for floor selection:
1. Strengthen the wood floor to buy a certain well-known enterprise products. The product must have the inspection report of the national authoritative department, and the product packaging must have complete identification.
2. Look at the wear resistance. Household floor wear-resisting rotations are usually more than 4,000 rpm, and usually more than 9000 rpm are used in public places. The decorative layer is resistant to light.
3. Check the formaldehyde release limit. The formaldehyde emission in laminate flooring is ≤1.5mg/L.
4. Look at the substrate density. The density of the base material of laminate flooring should be 0.84-0.9/cm3. It is not suitable for the smoke density to be too low or too high.
5. Look at water resistance. The index value is high, the water resistance is poor, and it is easy to cause dimensional changes in a wet environment. The water absorption thickness expansion rate should be ≤ 2.5%.
6. Look at the processing density. Observe whether the product is smooth and smooth, whether the tongue and groove are suitable or not, and should not be too loose or too tight.
7. Sales + pavement + warranty. "Buying" and "shopping" do not divide the family, reach the paving acceptance criteria, and have a complete after-sales service guarantee.
Flooring purchase Nature Flooring Del Floor Decoration Formaldehyde Doors Price Wood Furniture Furniture Cypress Furniture
Full spectrum LED Grow Lights 600/900/1200W /2000W Double Chips LED Grow Lights Indoor Plants lamp for flowering and growing
Product Description
1. Comply with the safety requirements around the world
2. High power LED,Life 50,000 hours
3. Energy saving 80%,compared to sodium lamp sand metal halide lamps
4. Fan cooling,low temperature rise
5. A variety of LED chip synthesis spectrum.
6. Input: AC100~277V,PF >0.9
7. Recommended irradiation distance of 0.5 ~ 0.8m,Coverage 0.7m @ 6m2
8. Warranty:3 years
9. CE RoHS FCC.UL
How to Select the Best Grow Light for your Greenhouse?
The plant needs light to thrive cause the light is essental for photosynthesis.without it,plants can not make food.but light can also be too intense,too hot or last too long for growing healthy plants.plant growth accelerates with abundant light because more of the plant`s leaves have exposure,which means more photosynthesis.in the winter,days are not long enough,but many plants still need 12 hours or more of light per day.
Now,adding led grow lights to your greenhouse is an nice choice if you live in the north, and can not get enough daylight in winter.you might be take HID into consideration,cause it has high output and cover a wide area.but now,we providing you some dfferent.the newest type of grow lights use LED technology.
Provides Maximum Light Density and optimizing spectrum(410nm-740nm,white)
as we know that the plants need more light from the blue side of the spectrum during their seedling stage and when developing foliage and require light from the orange to red side of the spectrum while inblooming and fruiting phases. We adopting lastest intergrated COB technology, white , more red and blue PAR(410-740nm) per Watt than any other lighting fixture for the best color uniformity.
Dual Veg and Bloom for plant growth and bloom
the Led grow lights feature selectable VEG and BLOOM light spectrums to deliver maximum performance from seeding through the flower stage and finally harvest.
Increase yields and potency
using high quality lense that hyper-focus the lights on your canopy.the photons are beamed directly to the plants.this gives growers the ability to get greatest possible crop yield.
Reduce your costs with energy efficiency
energy-efficient cannabis grow lights cost between 40%-60% less to operate compared to HID lam year.
Led grow light also eliminate the needs for ballasts and reflectors while they minimize the cooling systems,accelerating your payback.you will see the electrical bills trimmed by approximately half,year after year.
Installs and operates simply
the input voltage is AC100V-240V,fit for the world standard,built-in power supply.do not need other equipment,just access to the Plug,the lamp will be work smoothly. The led grow lighting is small size,just few inches and easy to install.it is the good option for some greenhouse.
Long lifespan
using built-in quiet fans and the shutter in the wind,induced draftfrom all sides.runs with quiet. Useadvanced isolation power supply and soft start protection technology, to prevent the high voltage when turn on the light from damagingthe lamp body.
Our professional full spectrum LED grow lights are suitable for all the indoor plants and good for seeding, growth,flowering and fruiting stages of plants, increasing the harvest and Saving energy.
User manual:
1>Indoor and green house use only
2>Do not touch the surface when the power is on
3>Do not use it at the place where the water is dripping
4>Blue is good for vegetative and red is good for flowering and budding, customer can choose the ratio of the red and blue, which has wonderful efficacy for the plants
Our Advantages
Professional: we are professional LED Grow Lights and LED Aquarium Light manufactuer here in China, you will get Professional and High quality LED Grow Lights and LED aquarium lighting from us and get good guarantee.
Cost-effective Price: we don`t have the lowest price, but the grow lights and Aquarium Light you get from us really cost-effective, good quality & decent price.
Win-win situation: Long term business is our mission, we think you will agree with us if you are running a business, so we will provide good led aquarium grow lights and warming service to build a long-term business relationship with you
24/7 unlimted customer service: we are always here for you for your question, any question just email us or call us, we will do our best to help you all the way.
Long term warranty: Don`t worry about the quality and we guarantee you 3years warranty for all the LED Plant Grow Light and coral reef led aquarium light..
Best buying experience: you will get the tiptop serive you have ever had,just have a try and you`ll see.
Philizon Fulll Spectrum LED grow lights are perfect for green house applications and much more!
Full Spectrum Led Grow Lights,Full Spectrum Plant Grow Light,Full Spectrum Led Plant Grow Light,Full Spectrum Indoor Plant Grow Light
Shenzhen Phlizon Technology Co.,Ltd. , https://www.szledplantgrowlights.com