In actual production, zinc and zinc alloys are mainly smelted using a crucible furnace, and coke furnaces, gas furnaces, resistance furnaces, and induction furnaces are also available. Due to the lower melting temperature of the zinc alloy, the erosion of the lining or crucible is greatly reduced. In addition, zinc alloys react with iron at normal smelting temperatures. To avoid contamination of the alloy with iron, cast iron crucibles should not be used. The tools used should be coated with a suitable refractory coating, or be used to form a layer of iron-resistance on the outer surface of the crucible. Mass oxidation, graphite burn and phase change protection layer.
Zinc alloys have a zinc-rich phase and a rich phase. Due to their different relative densities, elements segregate in the melt. Therefore, the melt has better stirring measures before casting. The cored induction electric furnace has the function of automatically stirring the melt, and the melt of the coreless induction furnace needs to be stirred with a little stirring, and the molten liquid of the reverberation fire resistance resistance orange oven needs to be stirred as a whole before casting. In addition, in the melting, it is necessary to prepare a spoon, a large spoon, a bell jar, a sampling spoon, a slag spoon, a ladle, and the like.
Without exposing screws, the die-casting aluminum of LEDER technology`s LED inground light gives it excellent heat dissipation, prolongs its lifespan, and reaches its waterproof performance up to IP68. Humanized lighting mostly installed are lawns and undergrowth to avoid shining directly into your eyes, this inground light`s COB LED chips to shine over a 60° beam angle while the optical lens keeps the lights from dazzling your eyes.
This LED inground light features the ability to adjust the direction of the light from outside the fixture - leaving the factory seal intact. Featuring a cast brass housing that sits within a heavy-duty polymetric sleeve, it also offers silicone rubber gaskets at the lens, a potted driver, and a strain relief below, all designed to prevent water ingression.
Features:
• Sealed drive
• Modern minimalist design
• Group and control multiple lights with the smart life app
• Energy saving save electricity
• water impervious
• Color temperature :3000k-6000K
• Stainless steel frame
• Type of protection: IP20 /IP65 (Some models)
• Warranty:3 - 5 years
You can use this light where many people gather or where many activities take place. To meet different lighting needs, this light is suitable to be installed in soil, cement, stone, wood and other environments.Outdoor Shallow Inground LED Well Light round inground fixture with stainless steel finish framework, for outdoor use.
We have rich production experience in lighting. Except LED Inground Light, we also offered other product in Outdoor Lighting ,such as LED Flood Light , LED street Light , LED Inground Light, LED Spike Light ,LED Bollard Light ,LED Wall Washer,Outdoor Wall Light & step light as so on .
Inground Light,Inground Uplight,In Ground LED Lights,In Ground Up Lights
JIANGMEN LEDERLIGHT LIGHTING Co.,LTD , http://www.walllightindoor.com