Digital printing seems to be an era, because digital is related to an era.
Digital printing , can be quantified and controlled, energy consumption on demand, regardless of color, fabric, it seems that there is no need to consider time, place, how is it not an era?
Thermal transfer: inkjet printing onto thermal transfer paper, transfer to polyester and other synthetic fibers by heating, the whole process is short, no water operation, widely used in cycling wear, sports shirt, mouse pad, pillow and other industries .
Disperse direct injection: The printer directly prints onto the fabric on the slurry, directly hot pressing, or baking, completes the color development, and has low precision requirements. It is widely used in the banner and advertising industries.
Thermal transfer is even derived from transfer to cotton, on silk, only the fastness and color are to be considered.
Paint printing : direct spray onto various fabrics, especially cotton, blended, and burlap. If you consider the fastness, you can spray the primer before spraying, and improve the fastness and brightening color after spraying. The whole process of dry printing, and color fastness but slightly worse. Fastness can generally be achieved at three levels.
Active and acid printing : pre-sizing, the purpose is to prevent diffusion, provide reaction conditions, and then print, steam and wash. The activity is mainly for cotton, silk, hemp, and acid. It is mainly for silk, wool, nylon and other fabrics. The acidity is very good in color, and the activity is good in fastness.
There are other printing methods related to digital printing , such as cold transfer, water transfer, universal printing, inkjet printing, through the diversity of ink, has covered a variety of media, can not do a paint The layer can be solved, not so much as a production method, I believe that this is a way of life.
I think another question is whether the craft determines the aesthetic or the aesthetic determines the craft. This is equivalent to asking why the northerners eat noodles. The southerners eat rice. It is not what you like to eat. It is what you started eating from an early age. What is the decision in your family? If our technology can only be dyed, there will be no colorful colors. If our technology can only be used for wire mesh, it will be difficult to make large flower paintings. Thanks to the arrival of the inkjet era, we have changed. We are no longer restrained and uneasy, we are no longer narrow.
LED Sensor Batten Lights has options of microwave sensor and infrared sensor. There are two sensing modes. One is 0-10v dimming, and the other is on/off.
The main difference between these two modes is that the 0-10v dimming mode can set the brightness of the light after the person walks, and the pending time of this brightness can also be set. On/off mode, you can only set the time for the lights to turn off after a person walks, but not the brightness (that is, functions 3, 4 cannot be implemented). The 0-10v dimming mode is more intelligent.
Briefly introduce the function of sensor light:
1. Set up daylight threshold: If the ambient light is higher than the set brightness, the sensing function will not be triggered.
2. Set up the hold time: The time for the light to maintain brightness after the person walks away.
3. Set up a stand-by dim level: set the brightness maintained after the person walks
4. Set up stand-by time: After the person walks, the time to maintain low brightness
5. Set up detection area: Set the detection area.
Toggle button can set the remote distance of remote control and sensor.
If you need sensor lights in factories or warehouses, corridors, or other indoors, you can choose this LED Sensor batten lights. If you need IP66 sensor light, you can choose Sensor Waterproof Light.
Motion Sensor Led Light,Sensor Led Light,Motion Sensor with Led Light,Led Light Motion Sensor
SHENZHEN LITEHOME OPTOELECTRONIC TECHNOLOGY CO., LTD. , https://www.litehomelight.com