The purchase of wooden floors
Can be roughly divided into solid wood flooring, engineered wood flooring, laminated wood flooring, bamboo flooring and so on.
(a) Solid wood flooring.
Solid wood floors are floors made of wood, most of which are floorboards and are easier to install. More than half of the floors in the market are finished floors painted (painted), commonly referred to as "painted boards." Paint plates are processed, painted, and dried at the factory, and the quality is high. Nowadays, sound paints are not easy to reach their quality levels. After the lacquer board is installed, it is not necessary to plan, polish or paint the surface. Solid wood flooring is divided into hardwood flooring and softwood flooring boards by wood texture. 1, wooden floor: Hardwood flooring texture is hard, fine texture, good wear resistance, elastic, dry, clean, beautiful. The wood used for ordinary hardwood floors includes ash, birch, walnut, oak, jellyfish, eucalyptus, etc. The wood used for high-grade wood floors includes cherry, longan, and camphor. 2. Cork flooring: It is mainly made of pine wood and fir (Kikura, hemlock, etc.) and cypress wood. Cork flooring is warm and elastic. However, the wear resistance is poor. If it is not dry enough, it will be more easily deformed and cracked.
(b) Solid wood composite floor
Solid wood composite flooring is made of solid wood, with the following three types: 1. Three-layer parquet. Made of three different conductive wood glues. The surface layer uses hard wood such as beech wood, birch wood, beech wood, cherry wood, manchurian ash, etc. The middle layer and the bottom layer are made of soft wood. If the core board is made of pine wood, the elasticity of the wood plate is relatively low. Cost. 2. Multi-layer parquet. A multi-layer plywood is used as a substrate, and a hardwood sheet is inlaid on the surface, and laminated by a urea-formaldehyde resin adhesive. 3. New solid wood composite floor. The surface layer is made of hard wood such as beech, birch, beech, cherry, ash, etc. The middle layer and bottom layer are made of medium density fiberboard or high density fiberboard. The effect and durability are similar to those of the three-layer wood panel. (III) Strengthened composite flooring Reinforced composite flooring consists of three layers of materials. The middle layer is a high-density fiberboard. It has strong impact resistance and is not easily deformed. The bottom layer is a balancing layer and is resistant to moisture. The surface layer is covered with melamine on the decorative layer of the printing. Wear-resistant layer, abrasion resistance is much higher than wood, has good flame retardancy, and corrosion, moisture, anti-mite. The surface can print a variety of wood grain, beautiful and generous. Paving is quick and easy, saving wood. But elasticity is worse than solid wood flooring.
(d) bamboo flooring
Bamboo flooring is a floor made of bamboo after treatment. It is rich in the natural beauty of natural materials, but also has the advantages of wear resistance and durability, and it is also resistant to earthquakes and earthquakes. Bamboo flooring is warm in winter and cool in summer, moisture-proof, wear-resistant, and easy to use. It can reduce the use of wood and protect the environment. The representative brands of solid wood composite flooring are: Gress and Fumeng laminate wood floors. The representative brands are: Import: Shengxiang, Oudian, Longbow, Sunerxin, Golden Eagle, Yunyun, Weitech, Kangdu (all Germany) , Bailey (Sweden), LG (Korea), etc. National products include: Bai Gao (Zhongshan), Jixiang, Shengda (Sichuan), Huili (Shanghai), Yali (Chaozhou), Ju Ning (Hubei) and other domestic bamboo flooring: Gui Zhu (Jiangxi)
Pick a wooden floor note
1. Choose according to economic strength. 2 Check product packaging, manufacturers, trademarks and quality inspections, and ensure commitments. 3. Make sure that the floor is squared on the plane and checked on the plane: (1) The thickness is the same, and the machining accuracy must be less than 0.5 mm. (2) The seams are tight and the gap is less than 0.2mm. (3) The spliced ​​square diagonal error is less than 1 mm. (4) The seam gap of the mouthpiece is less than 1 mm. (5) The board surface is smooth and smooth, the pattern is clear, and the paint surface color is uniform. Selection of laminate flooring Note Thickness: The thickness of the floor should be 8 mm. Floors with a thickness of only 6 mm are mostly floors that are temporarily used for activities such as exhibitions. The price is low and the floor life is less than 8 mm thick. Wear-resistant rotation: It is an important indicator of floor strength, divided into initial rotation (IP), average rotation (AT), final rotation (ET), the same number of rotation indicators should be selected when selecting flooring. Water resistance: It is advisable to soak the water in the water for 24 hours with the same plate, and check whether the surface layer is skinned and inflated. Check the quality of the floor's mouth and crucible, as well as whether the damp-proof anti-corrosion material on the back of the board is full.
Nature floor del floor paint decoration Gree
Nano is an innovative technology that can deposit very fine and thin metal films on products. Applied to stainless steel sinks, this technology ensures the durability and longevity of the product's color and helps maintain its beauty. Nano-coating makes the sink antibacterial, waterproof and oil resistant.
Nano Sink,Black Sink Kitchen,Nano Gold Sink,Nano Granite Sink
JIANGMEN MEIAO KITCHEN AND BATH CO.,LTD , https://www.meiaogroup.com