Floor paint coating construction method

The trowel coating is a construction method in which thick coating is applied to the adhesive coating using a metal trowel with teeth. Generally used for painting high solid content self-leveling floor coatings. The solvent-free self-leveling floor coating is applied by means of a toothed trowel or a material trowel. Due to the thick coating formed by coating, it will directly affect the flatness and smoothness of the coating surface, and it will affect the coating quality of the top coating. Therefore, the practices of the construction workers must be correct and skilled, and the basic work must be solid.

Cocoon coating is mainly used for solvent-free self-leveling floor coating construction. The construction tool is a file. The paint components are mixed separately, proportioned and fully stirred, filtered with a filter, remove the foreign particles, and fell on the floor of the paint start position, first apply the corners, and then press the sickle, Tilt it at an angle to the ground and level it down the ground. Repeatedly stroked around from side to side, taking care to close the lap joint with a knife. If the force is uneven or if the blade tip is not properly applied, seams or knife marks will occur. When the self-leveling floor coating is applied, the floor surface is required to be flat and horizontal. The floor coating quality requirements: smooth, smooth, uniform, no marks and interfaces.