The design and placement of advertising patterns on advertising tents has always been a problem for everyone. After talking to a lot of customers, we learned about the situation: we want the pattern to be conspicuous, and let people look at the design that can be remembered at a glance.
After a field visit, Kunming promotional tents do have such problems. The tents seen are either the pattern color is lost; or the color of the pattern is almost the same as the color of the tent, the contrast is poor, and the protrusion is not prominent. It’s very simple to support the advertising tent. The first time, some new ones, it’s very easy to get a few times. Anyway, it’s almost the same.
1, full, support
After choosing a good place, support the account, hang the account, hit the nail, ok, simple!
Pay attention to the details, try to fill it up---the inner account is hung up, the curtain of the outer account is pulled in place, then the tent is pulled as far as possible, as far as possible, the four corners are pulled outward, and then the nail is nailed---the ground nail must be To be tight, firm and stable, the 10 nails of the EH225 must be tightly nailed to the ground. After that, the curtains are opened. It is felt that the curtain zipper is tight and stretched flat, from any of the four sides of the tent. The angle is very tight, I think it is almost the same. Of course, if the wind rope is in a windy place, it must be tied firmly on the tree or nailed to the ground.
Why is it so tight, so hard? Go in and see, you will know, go into the internal account, look around, the internal account and the external account are about 5~10cm away, and it is not easy to get in touch. The internal account is very flat everywhere, there is no place to huddle, only In this way, the maximum comfort can be ensured. If it rains, or condensation - in fact, due to the temperature difference during the rain, the inside of the account will also condense, and a small amount of water vapor will flow down the external account. The foreign account is not tight, not strong, even fluttering in the wind, so the condensate on the inside of the outer account will be on the inner account - too many friends did not notice this, and the internal account was wet. Just said that the tent is not good, huh, huh
2, ground nail
The EH225 is a good tent, but the original 14 iron nails are really bad. People who have used it several times have the nails that have been bent like this! ? I still can't press it in. I use bricks and stones to smash. As a result, there are small stones in the soil below. The best nails are bent, and it is hard to break in. I found that I couldn’t bite the ground and dangle. .
Therefore, I strongly recommend aluminum alloy nails. The best I have ever said is that G-shock's moss is nailed. 7075 aluminum, triangular, on the cool peaks of winter, with leather boots. Go in, use the buck pliers to pull out the second day, solid! But too expensive! More than 10 yuan! Later, I had a few friends with the rabbit to collect a large number of people to buy a V-shaped nail in the end of the world (three husbands are also the goods for the end of the world, Sanfu website to buy 6 yuan / root), this nail is cheap, it should be 6 series aluminum Material, but also quite good! ! ! It’s so cool to break in with a big rock on the yak’s ridge! The tent buckle is stable on the top.
In fact, the old man knows that the good nail is indeed the big pill of the tent!
3, floor mat
Similarly, Xinyi buy tents generally do not buy this thing, but people who go out often have a tent mat. It is strongly recommended that whether it is the base of PE or the foundation of PU nylon cloth, it is best to accompany a tent mat. It can be said that like the aluminum alloy nails, it is the two best companions of the tent. It not only protects the foundation of the tent to a large extent, but the general tent mat is waterproof (rubber sink, or rainproof PU coating). The nylon cloth is light, and it is much cleaner. It saves the bottom of the tent, so it is just a dirty tent mat. After that, the bottom of the tent mat is ok.
Moreover, in the place where the surface is not flat, a number of floor mats have greatly enhanced the comfort of the sleeping tent. After all, a layer of padding!
4, aluminum alloy rod
Needless to introduce this? ! I don’t know where it’s better than the fiberglass rod. The strength, weight, and toughness have determined that the high-end tents have no choice but to choose the aluminum alloy rod. If you don’t talk about the ESTEN pole of the 7 series aluminum, it’s the simplest. Mottled, or color-matched aluminum rods are super good!
Advertising for the tent http:// is mainly on the tarpaulin on the ceiling. There are thousands of advertisement design methods for a tent in the district. How can the advertisement be large? There are some tips: First, the sign must be on the slope of the roof, so that it is easy to see from a distance. The skirt must have an advertising theme or a cheap identification mark and a phone call. Language, that is useless, the essence of advertising is: let people remember in the streamlined and clear, to achieve this effect is definitely a successful tent advertising!
New design and new Features:
1.The brightness of the light is evenly distributed,No Harmful ,Flicker-free,no dark area;
2.New update feature,for special design,with grille net and anti-glare side cover,double-anti glare;
3.Structural waterproof,protection level up to above IP66;
4.Equipped with air pressure valve to ensure the balance of air pressure inside or outside;
5.Multi-color mixing with DMX512 control system, gray rate upto above 65536 grade, refresh rate upto above 4K;
6.Bracket With dial and gear to adjust anglel,stable and reliable; 180°adjust projection angle;
7.4mm flat tempered glass,body no step design,dust-free and clean self;
8.Using waterproof 3-ways power supply,can transmit electricity to more remote distance;
Light Bar,Led Spot Linear Bar,Led Linear Bar,Rigid Light Bar
Guangdong harmonglobal Lighting Industry Co.,Ltd , https://www.harmonglobal.com