Waterproof coating 3-step walk no longer leaks at home

Waterproofing is a very important part of home decoration. Like other concealed works, it is easy to be ignored by the owner during the renovation. Under normal circumstances, the bathroom, bathroom and kitchen floors in the building are all made of waterproof layers and are easily damaged when the floor is redecorated. If it is not repaired in time, leakage will occur in the future, affecting neighbors. Therefore, in the decoration should pay attention to protect the waterproof layer, if accidentally damaged, repair in time to avoid hidden dangers.

There are two kinds of waterproof materials for home decoration that are currently sold on the market: one is a modified asphalt waterproof coating and a glass fiber cloth, and the glass fiber cloth can increase the strength and increase the flexibility. The use of this coating, waterproof engineering is more complex, but the price is not high, about 100 yuan per square meter; the other is polyurethane waterproof coating, is a high-grade, waterproof coating with a polymer coating. This paint has a good waterproof effect, but the price is higher. Price per square meter is about 140 yuan.

When doing waterproof construction, the first step should be to deal with the grassroots. Remove the original decoration materials, clean the floating soil and cement, and require the surface to be smooth and dry.

The second step: Paving waterproof coating. Brush a layer of modified asphalt on the base of the water repellent treatment, spread a layer of glass fiber cloth, and then repeat the brushing once. Finally, paint the second layer of glass cloth again, and the water-repellent treatment is finished. The waterproof coating should be painted evenly, and the glass fiber cloth and the waterproof layer should be closed tightly. There can be no phenomenon of leakage brushing, drumming and falling off, otherwise it will affect the waterproof effect. If you choose polyurethane as a waterproof coating, generally do not add glass fiber cloth, as long as repeated brushing 2-3 times on it. Because the polyurethane coating itself can form an elastic protective film, it has certain tensile properties. In order to improve the waterproof effect, a layer of glass cloth may be laid, but the cost will increase.

It should be noted that when waterproofing the floor, waterproof paint and glass fiber cloth should be applied to the wall 20-30 cm away from the ground to prevent leakage of the wall and ground joints, thus forming a closed and firm waterproof layer. For walls of showers, soft light walls and indoor walls that are leak-proof, waterproof paint must be applied to the wall at a height of 1.8 meters or covered with a wall to prevent wall leakage.

The third step is to do a “sweeping water” test. The “sweeping water” test is an important test method for checking the waterproof quality of the interior. After the waterproof project is completed, seal the door and the water outlet and fill the room with water to a certain liquid level. If there is no significant drop in the liquid level within 24 hours, it is qualified. After the "sweeping water" test is completed, a layer of cement mortar protective layer is applied on the waterproof coating layer, taking care not to damage the waterproof coating layer already prepared. After the protective layer of cement mortar dries out, it can be plastered with a wall tile or a spray paint for normal decoration.

Entrance Decoration Company Paint Glass Interior Decoration Cement Home Decoration Glass Tile Glass Door Kitchen Glass Sliding Door Bathroom Door Bathroom Waterproof Material Bathroom Waterproof Price Overall Bathroom Toilet Waterproof Bathroom Tiles

ETL Listed Led Strip Light

Rhein Lighting has developed a line of high voltage ETL listed Led Strip Light which is perfect for home, office and outdoor decoration. The light strip has multiple colors such as white, red, blue, yellow, green and RGB etc. The strip light has clear PVC tubing, which is flexible, transparent and durable and it can be shaped, formed or bent in any angle to perfectly fit the space being decorated.

The led rope light has come with different options of lengths in a reel, which has 50ft, 100ft and 150ft. The 120v Led Strip Light can be cut in every 1.64ft/0.5m along the cutting marks, without damaging the rest strips.

The Led strip light is ETL certified, which is Eco-Friendly, No splash and UV, without mercury and no damage to human and environment.

Rhein Lighting is specialized in the design and manufacture of led panel downlight, led slim down light, backlit Led Panel Light, led rope light, led strip light, led plant light and Led Grow Light etc.

ETL Listed Led Strip Light,Hykolity Daylight 42W Led Light Fixture,ETL Listed Led Strip Lights

Rhein Lighting Technology Co.,Ltd. , https://www.rheinlighting.com