Welding process of high pressure alloy tube

Welding Process for High-Pressure Alloy Tubes High-pressure alloy tubes are used in the petrochemical industry in addition to a wide range of applications for flight, aerospace and electricians. Therefore, the welding defects of the processing of aluminum and aluminum 1Cr5Mo alloy steel pipe alloys are the results that must be dealt with in the process of starting the soil. Fuyang Huaxia Dahua set up a small amount of aluminum-magnesium alloy (there are: 5083, 5183, 5A02 equal to LF2, LF4 in the old grade). High-pressure alloy tubes are widely used in various welded structural goods because of their light weight, high strength, good corrosion resistance, non-magnetic properties, good formability and good low-temperature function. Can be increased by more than 50%. However, in the welding process, high-pressure alloy tubes are prone to oxidation, bridge holes, hot cracks, burn through and sinking. 2 Aluminum and aluminum alloy biochemical functions and welding characteristics 2.1 Easy to oxidize. This kind of material is a welded material that is considered to be difficult to weld, especially the welding of small-diameter thin-walled tubes is more difficult to dominate.

Biaxial Geogrids

Item	TGSG15-15	TGSG20-20	TGSG25-25	TGSG30-30	TGSG35-35	TGSG40-40	TGSG45-45
Longgitudinal Tensile strength ≥ (KN/m)	15	20	25	30	35	40	45
Transverse Tensile strength ≥ (KN/m)	15	20	25	30	35	40	45
Longitudunal Elongation ≤ (%)	15
Transverse Elongation ≤ (%)	13
Longitudinal Tensile strength at 2% strain ≥ (KN/m)	5	7	9	10.5	30	30	30
Transverse Tensile strength at 2% strain ≥ (KN/m)	5	7	9	10.5	30	30	30
Longitudinal Tensile strength at 5% strain ≥ (KN/m)	7	14	17	21	24	28	32
Transverse Tensile strength at 5% strain ≥ (KN/m)	7	14	17	21	24	28	32
Width ≤ (m)	6

Feature:

● Increase the bearing capacity of the roadbed and foundation and prolong their service life.
● Prevent road surface and foundation from sinking or flawing, keep clean and beautiful ground surface.
● Convenient construction saves time and labor, reduce mounting time and decrease maintenance expense.
● Prevent culverts from flawing.

● Enhance earth slope and prevent water loss and soil erosion.

● Decrease underlayer thickness and save manufacturing cost.

● Enhance the stability of side slope turf net patch to improve greening.
● Replace wire netting used in mine as intermediate ceiling netting.

Product Application

Reinforced soil engineering Reinforced soil retaining wall, steep slope and the reinforcement and consolidation of the soft ground.

Road construction Ground treatment, reinforcement of the bridge abutment, reinforcement of the enbankment, reinforcement of the pile-net roadbed.

Irrigation projects Protection of port, approach lane, seabeach, channel, river channel, dam and other irrigation projects.

Enviromental projects Land reclamation, prevention and controlling of the desertification, and the composite protective structure in the landfill sites of urban garbage and waste.

Mine engineering Coal mines, side slope protection of opencast mines, slope protection for the dumping site of the opencast mines,reinforcement to counter dam in the large tailing ponds of the metallurgical mines.

Soil engineering Construction of stuffing and package system of heavy soil engineering.

Slope protection Slope protection in the area affected by earthquake.

Dump leaching Ground consolidation of large dump leaching and slag site.

FAQ
Q : Are you a factory or trading company?
A : We are a professional manufacturer that specialized in geomembrane, geotextile, Composite Geomembrane etc with ISO9001.
certificate more than 15 years.
Q : Where is your factory located? How can I visit there?
A : Our facoty is located is No.10 Yuanshan Road High-tech Development Zone, Laiwu District, Jinan City China. You can take the
plan to Jinan Yaoqiang International Airport, then we can pick you up.
Q : Could you send the sample before order confirmation?
A : Yes, we'd love to send a free sample to you for an evaluation if you need.
Q : How about the delivery time?
A : General within 3-7 days after received the deposit.
Q : Can you produce the product according to customers' requirements?
A : Sure, we are professional manufacturer, OEM and ODM are both welcome.
Q : Are you the Gold and Assessed supplier on alibaba?
A : Yes. We are the gold and assessed supplier on alibaba and has got the factory report by SGS.

Plastic Geogrids,Plastic Biaxial Geogrid,Civil Engineering Geogrid,Plastic Civil Engineering Construction Grid

Shandong Jinruixiang Geotextile Material Co., Ltd , https://www.jrxgeosynthetics.com