Indoor lighting is not only a lighting tool, but also a good decoration. But most people don't care much about the maintenance of indoor lamps, and if they are broken, they feel quality problems. Pay attention to the following points to make your indoor lighting fixtures last longer.
Correct installation is a prerequisite
Proper installation of the luminaire is a prerequisite for extending the life of the interior luminaire. If it is not installed correctly, indoor fixtures can easily break down, and sometimes even explode, which is very dangerous. Be careful when installing indoor fixtures in the home, bathroom and kitchen.
The indoor lighting of the bathroom must be equipped with a moisture-proof lampshade, otherwise the service life of the lamp will be greatly shortened. The indoor lighting of the kitchen should pay special attention to the smoke prevention, because the accumulation of grease affects the illumination of the lamp. Choosing a light-colored lampshade has good transparency, but it is easy to stick to ash. It should be wiped cleanly so as not to affect the penetration of light. In general, do not let the indoor lighting of the kitchen and toilet be placed in a position where water vapor condensation is easy to avoid bursting.
Indoor lighting should not be frequently switched when it is used. Because the indoor lighting is frequently started, the current through the filament is greater than the current during normal operation, so that the filament temperature rises sharply and accelerates sublimation, which greatly reduces its service life. Try to minimize the switch of the indoor lighting.
The long-term indoor lamp tube will be red or black at both ends, and it should be replaced in time to prevent unsafe phenomena such as ballast burnout. Generally speaking, when purchasing indoor lamps, the lamp bulb will indicate the effective time. Regular replacement of the aging lamp and the bulb will be helpful for the maintenance of the overall lamp.
After using the indoor lighting for a period of time, a thick layer of ash is deposited on it, which affects our vision, so we can't avoid regular cleaning. Be careful not to change the structure of the indoor luminaire during the cleaning process, and do not replace the parts of the luminaire. After the cleaning and maintenance is finished, the indoor lamps should be installed as they are, and the lamps and components should not be missed or misplaced.
Generally, indoor lamps are wiped with a dry cloth, and care should be taken to prevent moisture intrusion. If the indoor luminaire is non-metallic, use a damp cloth to prevent dust from accumulating and hinder the lighting effect.
Indoor lighting is an important decoration for the family. Whether it is easy to use or not is related to the quality of home life. But in general, many people don't care much about the maintenance of indoor lamps. Even if it is broken, it will be considered a quality problem. In fact, there is a certain law when the lamp is used or installed. If you pay attention to the above points and use it according to the law, the service life of the indoor lamp is very long.
Graphite Plate for Vacuum Pumps,Carbon Vanes for Vacuum Pump,Vacuum Pump Carbon Sheet
Dongguan Beqile Mechanical&Electrical Equipment CO.,LTD , https://www.betemvacuum.com