The 5th executive director (expansion) meeting of the 6th China Machine Tool Industry Association was successfully held in Beijing on October 20, 2011. The meeting was chaired by the Chairman of the Board of Directors, Long Xingyuan and the Chairman of the Board of Directors, Huang Zhao. Chen Qingtai, former director of the Development Research Center of the State Council, Zhang Xiangmu, director of the Equipment Industry Department of the Ministry of Industry and Information Technology, and Wang Jianyu, director of the Machinery Division, leaders of the China Machinery Industry Federation, leaders of the association, executive directors, invited representatives and attending meetings More than 180 people, including the secretary-generals of the branches, attended the meeting. 
Chairman of the 6th Executive Director (Enlarged) Meeting of the 6th China Machine Tool Industry Association 
Zhang Xiangmu, Director of the Equipment Department of the Ministry of Industry and Information Technology of the People's Republic of China, Mr. Zhang Xiangmu first made a report on "Accelerating Strategic Transformation and Promoting the Machine Tool Industry from Big to Strong". He said that China's relations with the world are getting closer and closer, and the uncertainty of international economic development still exists, and favorable and unfavorable factors are intertwined. Although the advantages of the domestic equipment manufacturing industry have not changed, the advantages of low cost are weakening. Internationally, China will curb China's development from barriers such as technology and trade. The "Twelfth Five-Year Plan" period is a crucial period for China to fully realize a well-off society. It is a period of hard work for the equipment manufacturing industry. It is a period of strategic opportunities with great opportunities. The machine tool industry should properly handle, seize opportunities and take advantage of the momentum. The task of China's equipment manufacturing industry is to adhere to the scientific development concept, take the development path with Chinese characteristics, accelerate transformation and upgrading, make good use of national major special policies, enhance core competitiveness, vigorously promote technological innovation, and transform and upgrade traditional manufacturing industries. Construct a modern manufacturing system, form a large number of high-tech products with independent intellectual property rights, and make greater contributions to national defense science and technology and key areas. 
Chen Qingtai, deputy director of the Development Research Center of the State Council, Director Chen Qingtai made a special report on "Policy Thinking on Industrial Structure Upgrading". When analyzing the situation at home and abroad, he said that China is a big manufacturing country but not a strong country. In the past few years, all the goods that China needs to import have increased in price internationally; all commodities that are exported by China have been cut internationally. This kind of shearing force has caused an outflow of interest, so that the benefits that China can enjoy are few, and the Chinese have become the vassals of foreigners making money. To change this situation, we must pay close attention to the adjustment and upgrading of industrial structure. The comparative advantages of China's industry include: 1. Comprehensive national strength, 2. Innovative activities are active, 3. Entrepreneurship is mature, 4. There are huge and diversified market demands in China, 5. National education is improved, and knowledge human resources are available. Abundant resources. China's industrial chain should be extended to high-end R&D and down-to-the-service. It should shift from importing imitation to independent R&D, from industry tracking to challenging global leadership, from technology consumers to technology producers. When talking about revitalizing the equipment manufacturing industry, he said that who is going to equip China is a heavy topic. The rapid growth over the years has relied on the introduction of a large amount of technical equipment. From the investment point of view, two-thirds of the previous years purchased imported technical equipment, and now more than one-third of imports are imported, and imported products are 2 to 3 generations behind the most advanced, and the most advanced technical equipment remains. There is a forbidden operation. Because the rise of China's equipment manufacturing industry will change the world's political and economic structure, foreign containment is inevitable. The 16 major projects are to support China's equipment manufacturing industry and are a national strategy! We must pay close attention to the way to adjust the structure and strive to achieve the goal of becoming bigger and stronger. 
Wu Bolin, Executive Vice President of China Machine Tool Industry Association Association Wu Bolin, Executive Vice President, made a work report on “Implementing Strategic Changes and Striving to Promote the Industry from Big to Strongâ€. The report is divided into three departments: 1. Review of the industry development during the “Eleventh Five-Year Plan†period, 2. Industry goals and tasks during the “Twelfth Five-Year Plan†period, and 3. Implementation of the main measures for the development of the “Twelfth Five-Year Planâ€. In the report, he summed up the major achievements of the “Eleventh Five-Year†industry with detailed data, carefully analyzed the main problems, and proposed the great strategic goal of becoming bigger and stronger and the industry became stronger during the “Twelfth Five-Year Plan†period. Three major landmarks: 1. Breakthrough progress in providing equipment and services for key manufacturing industries in key industries. 2. The domestic market share of medium and high-end CNC machine tools has increased significantly. The domestic market share of medium and high-end CNC systems and functional components is significant. Improve, 3, form a number of world-renowned brands and competitive enterprises. He also drafted the main measures: 1. Initiatives for industry enterprises, 2. Promote the role of the association in promoting the industry from large to strong, and 3. Strengthen guidance and guidance to government authorities. The report of Executive Vice President Wu Bolin was an important document of the meeting and a program for the future development of the industry. It was highly valued and praised by the participants. Wang Liming Executive Vice President and Secretary General briefed on the industry economic operation situation in the first eight months of this year, focusing on the whole industry. Under the current economic situation, we must pay attention to the problems existing in the industry and take active measures to adjust as soon as possible. Product structure, focus on transformation and upgrading. At the same time, it is pointed out that although the growth rate of industry output in the second half of the year is a slow downward trend, it is cautiously optimistic about the economic forecast for the whole year. It is estimated that the industrial output value of the industry will increase by 18% in 2011. In view of the macroeconomic situation in 2012, after comprehensively analyzing the market situation and development environment that the industry will face next year, it is emphasized that in 2012, the whole industry will face greater challenges, the task will be more arduous, and the economic operation speed will fall back. At the same time, technological innovation and product structure adjustment in the machine tool industry will be further accelerated, and the industrial structure will be gradually upgraded. In the corporate communication, Long Xingyuan, Chairman of Qinchuan Machine Tool Group Co., Ltd., Guan Xiyou, Chairman of Shenyang Machine Tool (Group) Co., Ltd., Jiang Hua, General Manager of Sichuan Pushkin Ningjiang Machine Tool Co., Ltd., and Director of Shandong Bote Precision Co., Ltd. Chang Li Baomin, Zhang Wanmou, Chairman of Yantai Global Machine Tool Accessories Group Co., Ltd., and Wang Shequan, Deputy General Manager of Zhuzhou Diamond Cutting Tools Co., Ltd., spoke on behalf of the company. Zhang Zhigang, chairman of Jinan Second Machine Tool Group Co., Ltd., made a written exchange. Finally, Executive Vice President Wu Bolin made a summary of the meeting. He said that under the guidance of relevant government departments, after the full preparation of the "Working Tools Tool Industry" during the 12th Five-Year Plan period (one of the meeting documents), accurately analyzed and grasped the status quo of the machine tool industry and the domestic and international competition situation At the right time, the development strategy shift and the shift of work focus should be put forward, which should be used as a work guide for the industry development during the 12th Five-Year Plan period. First, we must adjust the development strategy of the enterprise, change the development mode, and realize the shift of work focus; second, we must innovate the market development model and management mechanism, overcome the difficulties of deep-level technology and industrialization technology, and strive to improve the competitiveness of the middle and high-end market. Third, we must strengthen the technological innovation system and the construction of a talent team with enterprises as the mainstay, and provide support and guarantee for the realization of the industry from "big to strong." Industry associations and enterprises should strengthen their reporting and communication with the government and strive for more guidance and support. By concentrating all aspects of energy and resources, we will coordinate actions and jointly promote the industry from large to strong. 
China Machine Tool Industry Association's second Secretary-General's work meeting in 2011 The second day after the end of the sixth executive director (expansion) of the Sixth Session (October 21) held the second working meeting of the Secretary-General in 2011. Nearly 50 people, including the branch secretary-general, the head of the general assembly and the staff, attended the meeting. The meeting was chaired by the Executive Vice President of Yan Liangzhi and the Executive Vice President and Secretary General of Wang Liming. The meeting heard the report on the completion of the key tasks and tasks of the association and the opinions on strengthening the construction of the club. He listened to the interpretation of the "points of work" by Deputy Secretary-General Chen Huiren and the implementation of the spirit of the meeting. The idea of ​​industry work; listened to the explanations made by Director Jiang Jianming of the Finance Department of the Association to strengthen the financial management opinions of the club assets; and listened to the briefing on the preparation of the CCMT2012 exhibition by Deputy Secretary-General Li Jingming. The focus of this meeting is to implement the spirit of the five-time executive director (expansion) meeting. Under the arrangement of the meeting, the Secretary-General held a heated discussion around the five executive directors (expansion) meeting of the Sixth Session and the "Working Points of the Machine Tool Industry during the Twelfth Five-Year Plan Period". The speeches were positive and the atmosphere was active. It is very timely, very important for the industry, and indicates the direction for the industry. He also said that he must promptly convey and implement the spirit of the meeting to all member companies, unify his thinking as soon as possible, change the development strategy, shift the focus of work, and fully implement the three iconic goals of the machine tool industry, and realize the industry's ultimate realization from large to strong. The transformation has laid a solid foundation. Secretary-General Wang Liming finally made a summary of the meeting. He asked each club to formulate a good work plan for the year and the 12th Five-Year Plan according to the characteristics of its own small industry, and earnestly do a good job in all work according to the requirements of the General Conference, in order to realize the strategy of making the industry bigger and stronger. The goal is to contribute positively. After the meeting successfully completed the scheduled agenda, it ended in a tense and warm atmosphere. (Correspondent Li Li)
Chairman of the 6th Executive Director (Enlarged) Meeting of the 6th China Machine Tool Industry Association Zhang Xiangmu, Director of the Equipment Department of the Ministry of Industry and Information Technology of the People's Republic of China, Mr. Zhang Xiangmu first made a report on "Accelerating Strategic Transformation and Promoting the Machine Tool Industry from Big to Strong". He said that China's relations with the world are getting closer and closer, and the uncertainty of international economic development still exists, and favorable and unfavorable factors are intertwined. Although the advantages of the domestic equipment manufacturing industry have not changed, the advantages of low cost are weakening. Internationally, China will curb China's development from barriers such as technology and trade. The "Twelfth Five-Year Plan" period is a crucial period for China to fully realize a well-off society. It is a period of hard work for the equipment manufacturing industry. It is a period of strategic opportunities with great opportunities. The machine tool industry should properly handle, seize opportunities and take advantage of the momentum. The task of China's equipment manufacturing industry is to adhere to the scientific development concept, take the development path with Chinese characteristics, accelerate transformation and upgrading, make good use of national major special policies, enhance core competitiveness, vigorously promote technological innovation, and transform and upgrade traditional manufacturing industries. Construct a modern manufacturing system, form a large number of high-tech products with independent intellectual property rights, and make greater contributions to national defense science and technology and key areas. Chen Qingtai, deputy director of the Development Research Center of the State Council, Director Chen Qingtai made a special report on "Policy Thinking on Industrial Structure Upgrading". When analyzing the situation at home and abroad, he said that China is a big manufacturing country but not a strong country. In the past few years, all the goods that China needs to import have increased in price internationally; all commodities that are exported by China have been cut internationally. This kind of shearing force has caused an outflow of interest, so that the benefits that China can enjoy are few, and the Chinese have become the vassals of foreigners making money. To change this situation, we must pay close attention to the adjustment and upgrading of industrial structure. The comparative advantages of China's industry include: 1. Comprehensive national strength, 2. Innovative activities are active, 3. Entrepreneurship is mature, 4. There are huge and diversified market demands in China, 5. National education is improved, and knowledge human resources are available. Abundant resources. China's industrial chain should be extended to high-end R&D and down-to-the-service. It should shift from importing imitation to independent R&D, from industry tracking to challenging global leadership, from technology consumers to technology producers. When talking about revitalizing the equipment manufacturing industry, he said that who is going to equip China is a heavy topic. The rapid growth over the years has relied on the introduction of a large amount of technical equipment. From the investment point of view, two-thirds of the previous years purchased imported technical equipment, and now more than one-third of imports are imported, and imported products are 2 to 3 generations behind the most advanced, and the most advanced technical equipment remains. There is a forbidden operation. Because the rise of China's equipment manufacturing industry will change the world's political and economic structure, foreign containment is inevitable. The 16 major projects are to support China's equipment manufacturing industry and are a national strategy! We must pay close attention to the way to adjust the structure and strive to achieve the goal of becoming bigger and stronger. Wu Bolin, Executive Vice President of China Machine Tool Industry Association Association Wu Bolin, Executive Vice President, made a work report on “Implementing Strategic Changes and Striving to Promote the Industry from Big to Strongâ€. The report is divided into three departments: 1. Review of the industry development during the “Eleventh Five-Year Plan†period, 2. Industry goals and tasks during the “Twelfth Five-Year Plan†period, and 3. Implementation of the main measures for the development of the “Twelfth Five-Year Planâ€. In the report, he summed up the major achievements of the “Eleventh Five-Year†industry with detailed data, carefully analyzed the main problems, and proposed the great strategic goal of becoming bigger and stronger and the industry became stronger during the “Twelfth Five-Year Plan†period. Three major landmarks: 1. Breakthrough progress in providing equipment and services for key manufacturing industries in key industries. 2. The domestic market share of medium and high-end CNC machine tools has increased significantly. The domestic market share of medium and high-end CNC systems and functional components is significant. Improve, 3, form a number of world-renowned brands and competitive enterprises. He also drafted the main measures: 1. Initiatives for industry enterprises, 2. Promote the role of the association in promoting the industry from large to strong, and 3. Strengthen guidance and guidance to government authorities. The report of Executive Vice President Wu Bolin was an important document of the meeting and a program for the future development of the industry. It was highly valued and praised by the participants. Wang Liming Executive Vice President and Secretary General briefed on the industry economic operation situation in the first eight months of this year, focusing on the whole industry. Under the current economic situation, we must pay attention to the problems existing in the industry and take active measures to adjust as soon as possible. Product structure, focus on transformation and upgrading. At the same time, it is pointed out that although the growth rate of industry output in the second half of the year is a slow downward trend, it is cautiously optimistic about the economic forecast for the whole year. It is estimated that the industrial output value of the industry will increase by 18% in 2011. In view of the macroeconomic situation in 2012, after comprehensively analyzing the market situation and development environment that the industry will face next year, it is emphasized that in 2012, the whole industry will face greater challenges, the task will be more arduous, and the economic operation speed will fall back. At the same time, technological innovation and product structure adjustment in the machine tool industry will be further accelerated, and the industrial structure will be gradually upgraded. In the corporate communication, Long Xingyuan, Chairman of Qinchuan Machine Tool Group Co., Ltd., Guan Xiyou, Chairman of Shenyang Machine Tool (Group) Co., Ltd., Jiang Hua, General Manager of Sichuan Pushkin Ningjiang Machine Tool Co., Ltd., and Director of Shandong Bote Precision Co., Ltd. Chang Li Baomin, Zhang Wanmou, Chairman of Yantai Global Machine Tool Accessories Group Co., Ltd., and Wang Shequan, Deputy General Manager of Zhuzhou Diamond Cutting Tools Co., Ltd., spoke on behalf of the company. Zhang Zhigang, chairman of Jinan Second Machine Tool Group Co., Ltd., made a written exchange. Finally, Executive Vice President Wu Bolin made a summary of the meeting. He said that under the guidance of relevant government departments, after the full preparation of the "Working Tools Tool Industry" during the 12th Five-Year Plan period (one of the meeting documents), accurately analyzed and grasped the status quo of the machine tool industry and the domestic and international competition situation At the right time, the development strategy shift and the shift of work focus should be put forward, which should be used as a work guide for the industry development during the 12th Five-Year Plan period. First, we must adjust the development strategy of the enterprise, change the development mode, and realize the shift of work focus; second, we must innovate the market development model and management mechanism, overcome the difficulties of deep-level technology and industrialization technology, and strive to improve the competitiveness of the middle and high-end market. Third, we must strengthen the technological innovation system and the construction of a talent team with enterprises as the mainstay, and provide support and guarantee for the realization of the industry from "big to strong." Industry associations and enterprises should strengthen their reporting and communication with the government and strive for more guidance and support. By concentrating all aspects of energy and resources, we will coordinate actions and jointly promote the industry from large to strong. China Machine Tool Industry Association's second Secretary-General's work meeting in 2011 The second day after the end of the sixth executive director (expansion) of the Sixth Session (October 21) held the second working meeting of the Secretary-General in 2011. Nearly 50 people, including the branch secretary-general, the head of the general assembly and the staff, attended the meeting. The meeting was chaired by the Executive Vice President of Yan Liangzhi and the Executive Vice President and Secretary General of Wang Liming. The meeting heard the report on the completion of the key tasks and tasks of the association and the opinions on strengthening the construction of the club. He listened to the interpretation of the "points of work" by Deputy Secretary-General Chen Huiren and the implementation of the spirit of the meeting. The idea of ​​industry work; listened to the explanations made by Director Jiang Jianming of the Finance Department of the Association to strengthen the financial management opinions of the club assets; and listened to the briefing on the preparation of the CCMT2012 exhibition by Deputy Secretary-General Li Jingming. The focus of this meeting is to implement the spirit of the five-time executive director (expansion) meeting. Under the arrangement of the meeting, the Secretary-General held a heated discussion around the five executive directors (expansion) meeting of the Sixth Session and the "Working Points of the Machine Tool Industry during the Twelfth Five-Year Plan Period". The speeches were positive and the atmosphere was active. It is very timely, very important for the industry, and indicates the direction for the industry. He also said that he must promptly convey and implement the spirit of the meeting to all member companies, unify his thinking as soon as possible, change the development strategy, shift the focus of work, and fully implement the three iconic goals of the machine tool industry, and realize the industry's ultimate realization from large to strong. The transformation has laid a solid foundation. Secretary-General Wang Liming finally made a summary of the meeting. He asked each club to formulate a good work plan for the year and the 12th Five-Year Plan according to the characteristics of its own small industry, and earnestly do a good job in all work according to the requirements of the General Conference, in order to realize the strategy of making the industry bigger and stronger. The goal is to contribute positively. After the meeting successfully completed the scheduled agenda, it ended in a tense and warm atmosphere. (Correspondent Li Li)Led therapy bulb with E27/E26 socket, Red Light Infrared works for full body, we have 12w 24w 36w bulb, with 660nm and 850nm wavelength, customized led also ok.
The most convenient red light therapy solution
- E27 therapy bulb Suitable to use on any part of the body.
- Anything in the first couple of inches of skin can be affected by this light, making it suitable for; hair health, general skin tone/beauty, acne, eczema, wounds, bruises, sunburn, joint pain, wrinkle prevention, and much more.
Therapy light, led therapy lamp, light therapy lamp, lamps for light therapy, therapy light lamp
Shenzhen Wenyi Lighting Technology Co., Ltd , https://www.szwenyigrow.com